Morphology and mechanical properties of high density polyethylene‐POSS hybrid nanocomposites obtained by reactive blending
- 8 December 2014
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 55 (9) , 2058-2072
Abstract
The high density polyethylene‐polyhedral oligomeric silsesquioxane (HDPE‐POSS) organic–inorganic hybrids were obtained and their properties studied. The hybrids were prepared by grafting of POSS on polyethylene chains during reactive melt‐blending of HDPE, maleic anhydride functionalized HDPE and amine‐functionalized POSS, taking advantage of the high efficiency of amine‐anhydride reaction in the molten state. The structure, morphology, and physical properties of the obtained hybrids and blends were studied to find the influence of POSS chemical structure and grafting degree on the morphological characteristics and mechanical properties of hybrid nanocomposites. It was found that grafting of POSS cages on HDPE chains leads to the POSS dispersion at the molecular level. On the contrary, when POSS was mixed with plain HDPE any grafting of POSS on polyethylene chains was not possible, which resulted in phase‐separated blend. The mechanical tests revealed that modification of polyethylene by grafting with POSS molecules does not affect significantly its mechanical properties, both static and dynamic, except ultimate strain, which is lower in hybrids and their blends than in plain HDPE. The impact properties (Izod impact strength) were slightly improved by grafting of HDPE with POSS. HDPE‐g‐POSS hybrids demonstrated also much enhanced thermo‐oxidative stability comparing to plain polyethylene. POLYM. ENG. SCI., 55:2058–2072, 2015. © 2014 Society of Plastics EngineersKeywords
This publication has 43 references indexed in Scilit:
- Structure Property Relationships and the Role of Processing in the Reinforcement of Nylon 6-POSS BlendsMacromolecules, 2012
- POSS related polymer nanocompositesProgress in Polymer Science, 2011
- POSS-based hybrids by melt/reactive blendingJournal of Materials Chemistry, 2010
- POSS Polymers: Physical Properties and Biomaterials ApplicationsPolymer Reviews, 2009
- Nanofiller‐reinforced polymer nanocompositesPolymers for Advanced Technologies, 2008
- Polymer nanotechnology: NanocompositesPolymer, 2008
- Developments in nanoscience: polyhedral oligomeric silsesquioxane (POSS)-polymersCurrent Opinion in Solid State and Materials Science, 2004
- Hybrid inorganic/organic crosslinked resins containing polyhedral oligomeric silsesquioxanesMacromolecular Symposia, 2003
- Polyhedral Oligomeric Silsesquioxane (POSS) Polymers and Copolymers: A ReviewJournal of Inorganic and Organometallic Polymers and Materials, 2001
- Silicate cages: precursors to new materialsJournal of Organometallic Chemistry, 1997