Recycled carbon fiber reinforced poly(butylene terephthalate) thermoplastic composites: fabrication, crystallization behaviors and performance evaluation
Authors:
- 27 November 2012
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 24 (4) , 364-375
Abstract
The thermoplastic composites based on poly(butylene terephthalate) (PBT) and recycled carbon fiber (RCF) were prepared through simple melt compounding by a twin‐screw extruder. An effective approach was utilized to clean and treat the RCF surface with a concentrated solution of nitric acid and then a solution of diglycidyl ether of bisphenol A as macromolecular coupling agent so as to improve the interfacial adhesion between the RCF and PBT matrix. As a result, the reinforcing potential of the RCF was enhanced substantially, and the mechanical properties, heat distortion temperature, and thermal stability of PBT could be significantly improved by incorporating this surface‐treated RCF. The morphologies of fracture surfaces indicated that the RCF achieved a homogeneous dispersion in the PBT matrix due to a good interfacial interaction between fiber and PBT. The investigations on the crystallization behaviors and kinetics demonstrated that the RCF acted as a nucleation agent for the crystallization of PBT, and the crystallization rate and nucleation density of PBT were increased remarkably due to the heterogeneous nucleating effect of RCF in the matrix. These features may be advantageous for the enhancement of mechanical properties, heat resistance, and processability of PBT‐based composites. This study may provide a design guide for carbon fiber‐reinforced PBT composites with a great potential as well as a low cost for industrial and civil applications. Copyright © 2012 John Wiley & Sons, Ltd.Keywords
This publication has 44 references indexed in Scilit:
- Recycled carbon fibre-reinforced polypropylene thermoplastic compositesComposites Part A: Applied Science and Manufacturing, 2012
- Recycled carbon fiber filled polyethylene compositesJournal of Applied Polymer Science, 2007
- Isothermal crystallization kinetics of poly(butylene terephthalate)/attapulgite nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2006
- Crystal structure of poly(butylene-2,6-naphthalate)Polymer, 1998
- Influence of branching on melting behavior and isothermal crystallization of poly(butylene terephthalate)Macromolecular Chemistry and Physics, 1997
- Advances in injection molding of fiber‐reinforced thermoplastics during 1991—Part I: Materials and processingAdvances in Polymer Technology, 1992
- Chain conformation of poly(tetramethylene terephthalate) and its change with strainPolymer, 1976
- Structures of Two Crystalline Forms of Poly(butylene terephthalate) and Reversible Transition between Them by Mechanical DeformationMacromolecules, 1976
- Comparative study of crystallization rates by d.s.c. and depolarization microscopyPolymer, 1976
- Reversible crystal deformation and conformational changes in poly(tetramethylene terephthalate)Journal of Polymer Science Part C: Polymer Letters, 1976