Evaluating Sisal Fiber-Reinforced Gypsum Composites for Water Absorption and Mechanical Performance
Open Access
- 27 May 2024
- journal article
- research article
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2024, 1-8
Abstract
There has been a great research interest for investigation of new construction materials which can reduce environmental impact and cost, with improved structural performance. Recently, sisal fiber is being used as a reinforcement material in the development of reinforced composites. Here, sisal fiber-gypsum reinforced composites were prepared using the hand lay-up method followed by the compression technique. The effects of weight percentage (Wt. ) of the sisal fiber reinforcement on the mechanical properties of the developed sisal fiber-gypsum composites were investigated experimentally by varying the Wt. as 5, 10, and 15. The mechanical properties were tested as per the ASTM standards. The results revealed that the long unidirectional sisal fiber-gypsum composites exhibited higher impact and hardness strengths with lower water absorption behaviour than the short-chopped sisal fiber-gypsum composites. In addition, the impact strength increased with increase in Wt. for both short-chopped and long unidirectional sisal fiber reinforcement. While the hardness strength decreased with increase in Wt. for both short-chopped and long unidirectional sisal fiber. The experimental investigation has established sisal fiber as an important reinforcement material for improving the performance of the neat gypsum in a wide range of architectural applications such as ceilings, decorative partitions, and light covers.Keywords
This publication has 37 references indexed in Scilit:
- Sisal fiber modified construction waste recycled brick as building material: Properties, performance and applicationsStructures, 2022
- Mechanical Properties of Natural as well as Synthetic Fiber Reinforced Concrete: A ReviewConstruction and Building Materials, 2022
- The influence of fiber type and length on the cracking resistance, durability and pore structure of face slab concreteConstruction and Building Materials, 2021
- A comprehensive overview of fibre-reinforced gypsum-based composites (FRGCs) in the construction fieldComposites Part B: Engineering, 2021
- Foamed gypsum composite with heat-resistant admixture under high temperature: Mechanical, thermal and deformation performancesCement and Concrete Composites, 2020
- Development of a new eco-friendly composite material based on gypsum reinforced with a mixture of cork fibre and cardboard waste for building thermal insulationComposites Communications, 2019
- Direct tensile behavior of amorphous metallic fiber-reinforced cementitious composites: Effect of fiber length, fiber volume fraction, and strain rateComposites Part B: Engineering, 2019
- Manufacturing of gypsum–sisal fiber composites using binder jettingAdditive Manufacturing, 2019
- Recyclability analysis of PLA/Sisal fiber biocompositesComposites Part B: Engineering, 2019
- Response of natural fiber reinforced polymer composites when subjected to various environmentsInternational Journal of Plastics Technology, 2018