Fatigue Characteristics of Steel–Concrete Composite Beams
Open Access
- 4 February 2024
- journal article
- research article
- Published by MDPI AG in Infrastructures
- Vol. 9 (2) , 29
Abstract
Fatigue in steel–concrete composite beams can result from cyclic loading, causing stress fluctuations that may lead to cumulative damage and eventual failure over an extended period. In this paper, the experimental findings from fatigue loading tests on composite beams with various arrangements are presented. Fatigue tests were performed up to 1,000,000 cycles using four-point loading, encompassing various ranges of shear stress at a consistent amplitude. Additionally, the effects of external post-tensioning and the strength of the shear connection were investigated. Static tests were run until failure to assess the enduring strength of the specimens subjected to fatigue. The cyclic mid-span deflections, slippages, and strains were measured during the testing. Based on the experimental findings, it was found that the damage region that the shear studs caused in the concrete slab, which resulted in a reduction in stiffness within the shear connection, grew as the loading cycles increased, leading to an increase in residual deflections and plastic slippages. Controlling the longitudinal fatigue cracks in the concrete slab was largely dependent on the strength of the shear connection between the steel beams and concrete slabs. Moreover, the applied fatigue loading range affected the propagation and distribution of fatigue cracks in the concrete slab. The strains in different parts of the composite specimens were significantly reduced by applying the external post-tensioning. With no signs of distress at the anchors, the tendons displayed excellent fatigue performance.Keywords
This publication has 13 references indexed in Scilit:
- Experimental and Theoretical Study on the Fatigue Crack Propagation in Stud Shear ConnectorsMaterials, 2023
- Fatigue performance of stud shear connectors in steel-concrete composite beam with initial damageEngineering Structures, 2022
- Effect of external post-tensioning on steel–concrete composite beams with partial connectionEngineering Structures, 2021
- Experiment-Based Fatigue Behaviors and Damage Detection Study of Headed Shear Studs in Steel–Concrete Composite BeamsApplied Sciences, 2021
- Fatigue Tests on Steel–Concrete Composite Beams Subjected to Sagging MomentsJournal of Structural Engineering, 2019
- Steel–Concrete Composite Beams Strengthened with Externally Post-Tensioned Tendons under FatigueJournal of Bridge Engineering, 2019
- Behaviour of steel-concrete composite beams using bolts as shear connectorsIOP Conference Series: Earth and Environmental Science, 2018
- Experimental investigation of steel-concrete composite beams with different degrees of shear connection under monotonic and fatigue loadsAdvances in Structural Engineering, 2017
- Parametric study for post-tensioned composite beams with external tendonsAdvances in Structural Engineering, 2017
- Fatigue Strength of Repaired Prestressed Composite BeamsJournal of Bridge Engineering, 2008