Computationally Efficient Surrogate-Based Magneto-Fluid-Thermal Numerical Coupling Approach for a Water-Cooled IPM Traction Motor
Open Access
- 5 August 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 83692-83704
Abstract
This paper proposes a computationally-efficient electromagnetic (EM)-computational fluid dynamics (CFD) coupling approach for a water-cooled Interior Permanent Magnet (IPM) motor. The numerical simulation of multiple fluids and their interaction with solid parts can be challenging. The proposed approach relies on the heat transfer coefficient (HTC) decomposition of different fluids/coolants inside the machine to generate an HTC look-up table (LUT) as a function of the coolant inlet flow rate. The HTC-LUT is then utilized as a surrogate model for the stationary coolant to decouple the fluid-to-fluid interaction and, hence, expedite the iterative approach. This reduces the computational time by almost two-thirds as compared to the multiple fluid approach while preserving the fidelity of the model. Additionally, the proposed approach formulates the correlation between the rotor speed, coolant flow rate, convective heat transfer coefficients, and the temperature rise, particularly for hot-spot locations in the end-windings. This approach uses a two-dimensional EM model coupled with a three-dimensional fractional CFD model. Thus, it reduces the computational cost and retains the model simplicity. The viability of the proposed coupling approach is also validated through lumped parameter thermal network (LPTN) analytical approach. The results from both approaches under different cooling conditions, flow rates, and current densities are in a good agreement.Keywords
This publication has 27 references indexed in Scilit:
- A multi-physics multi-objective optimal design approach of PM synchronous machines2014
- Coupled Electromagnetic–Thermal Analysis of Electric Machines Including Transient Operation Based on Finite-Element TechniquesIEEE Transactions on Industry Applications, 2014
- Gradient Calculation Methods on Arbitrary Polyhedral Unstructured Meshes for Cell-Centered CFD Solvers2014
- Design Considerations of a Brushless Open-Slot Radial-Flux PM Hub MotorIEEE Transactions on Industry Applications, 2013
- The near wall physics and wall functions for turbulent natural convectionInternational Journal of Heat and Mass Transfer, 2012
- Multiphysics Modeling of a Permanent Magnet Synchronous Machine by Using Lumped ModelsIEEE Transactions on Industrial Electronics, 2011
- Optimal Electromagnetic-Thermo-Mechanical Integrated Design Candidate Search and Selection for Surface-Mount Permanent-Magnet Machines Considering Load ProfilesIEEE Transactions on Industry Applications, 2011
- Optimization Design of a Segmented Halbach Permanent-Magnet Motor Using an Analytical ModelIEEE Transactions on Magnetics, 2009
- Electromagnetic and Thermal Design of a Linear Actuator Using Output Polynomial Space MappingIEEE Transactions on Industry Applications, 2008
- Design Optimization of Radially Magnetized, Iron-Cored, Tubular Permanent-Magnet Machines and Drive SystemsIEEE Transactions on Magnetics, 2004