Off-line path correction of robotic face milling using static tool force and robot stiffness
Authors:
- 1 September 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 5506-5511
Abstract
In this paper the developed method for off-line compensation of tool deflections when milling aluminum with an industrial robot is presented. The efficiency of this approach is verified with high precision measurements of deflections using a laser tracker. The compensation method includes both the static milling process model which can predict the mean value components of the tool forces and a new combined local/global approach for estimating the combined stiffnesses of joints. With a process model such as the one presented in this paper and estimates of the robot's joint stiffness values, the tool path can be adjusted to counteract deflections of the tool during milling operations. The model was estimated from a large set of machining experiments and is valid for a given tool and material. The stiffness of each joint is a combination of several effects: (i) stiffness of the links, (ii) stiffness of joint bearings and gears and (iii) stiffness of the position control loops given by the individual axis controller gains in the controller software. The method presented in this paper increases accuracy when using an industrial robot for milling in relatively hard materials.Keywords
This publication has 10 references indexed in Scilit:
- Method for estimating combined controller, joint and link stiffnesses of an industrial robot2014
- A method for off-line compensation of cutting force-induced errors in robotic machining by tool path modificationThe International Journal of Advanced Manufacturing Technology, 2013
- Off-line compensation of the tool path deviations on robotic machining: Application to incremental sheet formingRobotics and Computer-Integrated Manufacturing, 2013
- Elasto-Dynamic Model of Robotic Milling Process Considering Interaction Between Tool and Workpiece2012
- Calculation of the Combined Torsional Mesh Stiffness of Spur Gears with Two- and Three-Dimensional Parametrical FE ModelsStrojniški vestnik - Journal of Mechanical Engineering, 2011
- Joint stiffness identification of six-revolute industrial serial robotsRobotics and Computer-Integrated Manufacturing, 2011
- Springer Handbook of Robotics2008
- Machining with Flexible Manipulators: Critical Issues and Solutions2006
- Conservative Congruence Transformation for Joint and Cartesian Stiffness Matrices of Robotic Hands and FingersThe International Journal of Robotics Research, 2000
- A New Method of Constrained Optimization and a Comparison With Other MethodsThe Computer Journal, 1965