Understanding the Mechanical Biases of Tipping-Bucket Rain Gauges: A Semi-Analytical Calibration Approach
Open Access
Abstract
Tipping bucket rain gauges (TBR) are widely used worldwide because they are simple, cheap, and have low-energy consumption. However, their main disadvantage lies in measurement errors, such as those caused by rainfall intensity (RI) variation, which results in data underestimation, especially during extreme rainfall events. This work aims to understand these types of errors, identifying some of their causes through an analysis of water behavior and its effect on the TBR mechanism when RI increases. The mechanical biases of TBR effects on data were studied using 13 years of data measured at 10 TBRs in a mountain basin, and two semi-analytical approaches based on the TBR mechanism response to RI have been proposed, validated in the laboratory, and contrasted with a simple linear regression dynamic calibration and a static calibration through a root-mean-square error analysis in two different TBR models. Two main sources of underestimation were identified: one due to the cumulative surplus during the tipping movement and the other due to the surplus water contributed by the critical drop. Moreover, a random variation, not related to RI, was also observed, and three regions in the calibration curve were identified. Proposed calibration methods have proved to be an efficient alternative for TBR calibration, reducing data error by more than 50% in contrast with traditional static calibration.Keywords
This publication has 50 references indexed in Scilit:
- Measurement accuracy of weighing and tipping-bucket rainfall intensity gauges under dynamic laboratory testingAtmospheric Research, 2014
- Comparison of Rain Gauge Measurements in the Mid-Atlantic RegionJournal of Hydrometeorology, 2010
- Undercatch of tipping-bucket gauges in high rain rate eventsAdvances in Geosciences, 2010
- The impact of tipping‐bucket raingauge measurement errors on design rainfall for urban‐scale applicationsHydrological Processes, 2005
- Systematic correction of precipitation gauge observations using analyzed meteorological variablesJournal of Hydrology, 2004
- Flood estimation using radar and raingauge dataJournal of Hydrology, 2000
- Effect of the siphon control on the dynamic characteristics of a tipping bucket raingaugeHydrological Sciences Journal, 1994
- Short duration rainfall intensity measured using calibrated time-of-tip data from a tipping bucket raingageAgricultural and Forest Meteorology, 1991
- Calibration of the tipping-bucket raingageJournal of Hydrology, 1981
- A note on the dynamic calibration of tipping-bucket gaugesJournal of Hydrology, 1978