Investigation of Static and Dynamic Mechanical Properties of Coconut Tree Primary Flower Leaf Stalk Fiber Reinforced Polymer Composites
Open Access
- 30 January 2023
- journal article
- research article
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 20 (1)
Abstract
This study focuses on the determination of the mechanical characteristics of composites under static and dynamic conditions. The composites are prepared by reinforcing with 3 mm, 7 mm, and 10 mm short-treated coconut tree primary flower leaf stalk fiber (CPFLSF) in the polymer matrix. The 3 mm untreated CPFLSF composite (3UTCPFLSFC) reveals the lowest tensile, flexural, and impact properties, whereas 7 mm Alkali-Treated CPFLSF Composite (7ATCPFLSFC) indicate the maximum tensile strength of 34.31 MPa, tensile modulus of 1.81 GPa, flexural strength of 58.43 MPa, flexural modulus of 3.23 GPa, and impact strength of 8.25 kJ/m2. Dynamic mechanical analysis (DMA) reveals that the 7ATCPFLSFC had enhanced loss and storage modulus compared to untreated and other alkali-treated CPFLSF composites. The maximum decomposition is obtained for 7ATCPFLSFC in the region of 550°C temperature with a residual mass of 18% compared to other compositions. From the water absorption test, it was observed that, when increasing the soaking time of the composites, water intake properties gradually increased in the composite. However, the 7ATCPFLSFC absorbed water, compared to the other composites. A scanning electron microscope confirms better bonding in the composite, fracture of fiber, pull-out, fiber shearing, and tearing in the treated and untreated composites.Keywords
Funding Information
- No funding
This publication has 32 references indexed in Scilit:
- Characterisation of the volatile profile of coconut water from five varieties using an optimised HS‐SPME‐GC analysisJournal of the Science of Food and Agriculture, 2012
- Tensile and flexural properties of snake grass natural fiber reinforced isophthallic polyester compositesComposites Science and Technology, 2012
- Biodegradable composites based on lignocellulosic fibers—An overviewProgress in Polymer Science, 2009
- Dynamic mechanical analysis of the seawater treated glass/polyester compositesMaterials & Design (1980-2015), 2009
- Tensile behavior of high performance natural (sisal) fibersComposites Science and Technology, 2008
- Dynamic mechanical and thermal properties of MAPE treated jute/HDPE compositesComposites Science and Technology, 2006
- Fully biodegradable natural fiber composites from renewable resources: All-plant fiber compositesComposites Science and Technology, 2005
- Dynamic mechanical and thermal analysis of vinylester-resin-matrix composites reinforced with untreated and alkali-treated jute fibresComposites Science and Technology, 2002
- Effect of weathering on the mechanical properties of midribs of coconut leavesJournal of Materials Science, 1987
- Structure property studies of fibres from various parts of the coconut treeJournal of Materials Science, 1982