Influence of surface sealing on color stability and roughness of composite submitted to ultraviolet‐accelerated aging
- 8 January 2016
- journal article
- research article
- Published by Wiley in Journal of Investigative and Clinical Dentistry
- Vol. 8 (2)
Abstract
Aim: In the present study, we evaluated the influence of surface sealing on color stability and surface roughness of a composite resin after accelerated artificial aging.Methods: Thirty‐two specimens of a composite were prepared. After 24 h, the specimens were polished and divided into four groups (n = 8), according to the surface sealant used, including the control, which had no sealant application. Baseline color was measured according to the CIELab system using a reflection spectrophotometer. Surface roughness was determined using a profilometer with a cut‐off of 0.25 mm. After these tests, specimens were aged for 252 h in an ultraviolet (UV)‐accelerated aging chamber. Color stability was determined by difference between coordinates obtained before and after the aging procedure. Data of color change and roughness were evaluated by anova and Fisher's exact test (α = 0.05).Results: The results showed that the unsealed group had the highest color change compared to other groups (P = 0.0289), and there was no significant difference between groups sealed with surface sealant (P > 0.05). The artificial aging caused an increase in roughness values independent of the experimental group studied (P = 0.0015).Conclusion: The sealed composites showed lower color change after UV aging, but all groups showed clinically‐acceptable color change, and only liquid polish decreased roughness.Keywords
This publication has 26 references indexed in Scilit:
- Color stability, surface roughness and microhardness of composites submitted to mouthrinsing actionJournal of Applied Oral Science, 2012
- The Influence of One-step Polishing Systems on the Surface Roughness and Microhardness of NanocompositesOperative Dentistry, 2008
- Combined effects of staining substances on resin composites before and after surface sealant applicationJournal of Materials Science: Materials in Medicine, 2006
- The effect of polishing techniques on the surface roughness and color change of composite resinsThe Journal of Prosthetic Dentistry, 2006
- Effects of staining and bleaching on color change of dental composite resinsThe Journal of Prosthetic Dentistry, 2006
- Effects of various finishing procedures on the staining of provisional restorative materialsThe Journal of Prosthetic Dentistry, 2005
- Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literatureDental Materials, 1997
- Comparison of the color stability of ten new-generation composites: An in vitro studyDental Materials, 1994
- Effect of finishing on the in vivo wear rate of a posterior composite resinThe Journal of the American Dental Association, 1989
- Color Stability of New Composite Restorative Materials Under Accelerated AgingJournal of Dental Research, 1980