Optical in situ monitoring of plasma-enhanced atomic layer deposition process
- 29 May 2018
- journal article
- research article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 57 (6S2) , 06JF05
Abstract
An optical in situ process monitoring method for the early detection of anomalies in plasma process equipment is presented. Cyclic process steps of precursor treatment and plasma reaction for the deposition of an angstrom-scale film increase their complexity to ensure the process quality. However, a small deviation in process parameters, for instance, gas flow rate, process temperature, or RF power, may jeopardize the deposited film quality. As a test vehicle for the process monitoring, we have investigated the aluminum-oxide (Al 2 O 3 ) encapsulation process in plasma-enhanced atomic layer deposition (PEALD) to form a moisture and oxygen diffusion barrier in organic-light emitting diodes (OLEDs). By optical in situ monitoring, we successfully identified the reduction in oxygen flow rates in the reaction steps, which resulted in a 2.67 times increase in the water vapor transmission ratio (WVTR) of the deposited Al 2 O 3 films. Therefore, we are convinced that the suggested in situ monitoring method is useful for the detection of process shifts or drifts that adversely affect PEALD film quality.Keywords
This publication has 22 references indexed in Scilit:
- Controllable optical emission spectroscopy diagnostic system for analysis of process chemistriesReview of Scientific Instruments, 2010
- Atomic Layer Deposition: An OverviewChemical Reviews, 2009
- The Cutting Edge of Plasma EtchingScience, 2008
- Oxygen discharges diluted with argon: dissociation processesPlasma Sources Science and Technology, 2007
- Nucleation and Growth during Al2O3 Atomic Layer Deposition on PolymersChemistry of Materials, 2005
- Effect of Pulsed Plasma Processing on Controlling Nanostructure and Properties of Thin Film/CoatingsSurface Engineering, 2004
- Thin-Film Permeation-Barrier Technology for Flexible Organic Light-Emitting DevicesIEEE Journal of Selected Topics in Quantum Electronics, 2004
- End-point Detection of Reactive Ion Etching by Plasma Impedance MonitoringJapanese Journal of Applied Physics, 2001
- Global model of Ar, O2, Cl2, and Ar/O2 high-density plasma dischargesJournal of Vacuum Science & Technology A, 1995
- Reliability and degradation of organic light emitting devicesApplied Physics Letters, 1994