Composites based on polymeric blends reinforced with TiO2 modified aramid fibers
- 7 March 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (8) , 7116-7136
Abstract
The paper presents a study on composites based on 50:50 (PP:LLPE‐g‐MA) reinforced with 0.5, 1, and 2 wt% aramid fibers unmodified/modified with TiO2, processed by melt compounding. Micronic aramid fibers were acetone washed to remove impurities and treated with Ti(IV)isopropoxide precursor via sol–gel method, adding microcellulose for TiO2 particle dimension control. Composites were hot‐pressed into 4 mm‐thick plates for sampling and 0.5 mm‐thick sheets for thermoforming. All composites were successfully thermoformed, fibers‐based samples showing improved thermoforming ability without wrinkling. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Energy dispersive X‐ray spectroscopy (EDS) analysis confirmed the formation of TiO2 particles on the fiber surface. Optical microscopy, SEM and FTIR analysis exhibit the fibers' strong embedment into the matrix due to physical interlocking, generating surface defect reduction. Water absorption decreased from 0.195% (control) to 0.075 and 0% for 1 TiO2 and 2 TiO2 samples, due to material compactization. Contact angles increased from 95.18° (Control) to 108° (1 TiO2) and 112.89° (2 TiO2). The highest flexural strength and modulus were exhibited by 1 TiO2 sample that increased by 44.88% and 47.6% compared to the control sample, due to higher intrinsic rigidity of fibers and TiO2 modifying surface rugosity and phase interaction. The impact strength of the control sample improved by 139% compared to PP due to brittleness reduction, 1 TiO2 by 209% compared to PP, 29% compared to the control sample. The results and excellent thermoformability recommend the materials for encapsulation of electronic/expensive parts in automotive or drone applications, offering viable, facile, rapid, and cost‐effective solutions to easily replace damaged parts.Highlights: Aramid fibers were successfully modified using isopropoxide precursor; Strong embedment of fibers in the polymer diminishes crack propagation/damage; Improved impact and bending properties and water contact angle; The composites showed a high ability to thermoform into complex shapes; Potential to replace non‐reusable materials as encapsulation solutions.Keywords
Funding Information
- Unitatea Executiva pentru Finantarea Invatamantului Superior, a Cercetarii, Dezvoltarii si Inovarii (601PED/2022)
This publication has 59 references indexed in Scilit:
- Physico‐mechanical, and thermal properties of sisal/hemp/Kevlar fibers, fly ash and Titanium Carbide nanoparticles reinforced bioepoxy compositesPolymer Composites, 2023
- Effect of CNTs/nano‐TiO2 hybrid system on the drop‐weight impact response of Kevlar fiber/epoxy compositesPolymer Composites, 2023
- A review of the fabrication methods and mechanical behavior of continuous thermoplastic polymer fiber–thermoplastic polymer matrix compositesPolymer Composites, 2022
- Effect of stacking sequence and silicon carbide nanoparticles on properties of carbon/glass/Kevlar fiber reinforced hybrid polymer compositesPolymer Composites, 2022
- A Review: Recent Development of Natural Fiber-Reinforced Polymer NanocompositesJOM, 2021
- Relationship between the Processing, Structure, and Properties of Microfibrillar CompositesAdvanced Materials, 2020
- Hybrid approach for augmenting the impact resistance of p-aramid fabrics: grafting of ZnO nanorods and impregnation of shear thickening fluidJournal of Materials Science, 2019
- Surface Modification of Aramid Fibres with Graphene Oxide for Interface Improvement in CompositesApplied Composite Materials, 2018
- Fabrication of mechanically robust and UV-resistant aramid fiber-based composite paper by adding nano-TiO2 and nanofibrillated celluloseCellulose, 2018
- Maleic anhydride grafted linear low‐density polyethylene/waste paper powder composites with superior mechanical behaviorJournal of Applied Polymer Science, 2017