Evaluation of the internal stress distribution in conventional vibrated concrete and two-stage concrete through numerical analysis
Open Access
- 7 July 2026
- journal article
- Published by Springer Nature in Materials and Structures
- Vol. 59 (6) , 298
Abstract
This study presents a comparative evaluation of conventional vibrated concrete (CVC) and two-stage concrete (TSC) based on experimental characterization and finite element numerical modeling. Cylindrical specimens were experimentally evaluated through compressive strength, water absorption, void index, and surface electrical resistivity tests, while the numerical simulations were performed using a mesoscale finite element approach considering aggregates, grout, and the interfacial transition zone (ITZ) as distinct phases under elastic loading conditions. Experimental results demonstrated that TSC achieved significantly higher compressive strength (44.66 MPa at 28 days), corresponding to approximately 64% higher strength than CVC, along with reduced water absorption, lower void index, and higher surface electrical resistivity, indicating improved durability-related performance. Numerical simulations were performed using the finite element method under identical loading conditions corresponding to the lowest experimental failure load (21.17 MPa). The results revealed that TSC exhibited lower global displacement (0.115 mm) than CVC (0.125 mm), as well as a wider stress distribution within the coarse aggregate skeleton, with peak stresses reaching approximately 70 MPa, compared to 56 MPa in CVC. Despite this increased stress heterogeneity at the aggregate level, the average stress values in the grout and ITZ remained comparable between both concretes. These findings provide insight into how alternative concrete production methods may influence stiffness development, deformation control, and service-state performance of structural building components.Keywords
Funding Information
- Universidade Federal do Paraná
This publication has 22 references indexed in Scilit:
- An experimental and numerical investigation of coarse aggregate settlement in fresh concrete under vibrationCement and Concrete Composites, 2021
- Preparation of preplaced aggregate concrete and experimental study on its strengthConstruction and Building Materials, 2019
- Simulating Synchronous Grouting in Shield Tunnels with the Consideration of Evolution of Grouting Pressure2018
- Geologic Carbon Storage for Shale Gas RecoveryEnergy Procedia, 2017
- Effects of coarse aggregates on the electrical resistivity of Portland cement concreteConstruction and Building Materials, 2017
- Critical overview of two-stage concrete: Properties and applicationsConstruction and Building Materials, 2014
- Mesoscopic analysis of concrete under excessively high strain rate compression and implications on interpretation of test dataInternational Journal of Impact Engineering, 2012
- Investigation into viability of using two-stage (pre-placed aggregate) concrete in Irish settingFrontiers of Architecture and Civil Engineering in China, 2010
- Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortarCement and Concrete Research, 2009
- Effects of testing methods and conditions on the elastic properties of limestone rockEngineering Geology, 2004