Effect of Operational Parameters on the Thermal Performance of Flat Plate Oscillating Heat Pipe
- 8 October 2019
- journal article
- research article
- Published by Wiley in Journal of Heat Transfer
- Vol. 141 (12)
Abstract
Flat plate oscillating heat pipe (FP-OHP) is a unique heat transfer device and considered as a promising candidate for effective heat transfer device in electronics industries. A number of theoretical studies and experimental investigations have been carried out on FP-OHP in the past decades after its invention. However, due to the operational characteristics of FP-OHP, the effect of various parameters on the thermal performance of FP-OHP has not been completely revealed so far. This paper attempts to discuss the effect of operational parameters on the thermal performance of FP-OHP. In this study, the FP-OHP was investigated with different charge ratios, orientations, working fluids, and heat loads from 10 W to 150 W. In order to investigate the effect, 18 parallel square channels of 2 × 2 mm2 are machined onto pure copper plate (93 × 70 × 8 mm3) to form FP-OHP. DI water, ethanol, methanol, acetone, and FC-72 are investigated. The measured thermal resistance was strongly dependent on operational parameters. The optimum performance was observed with acetone with a charge ratio of 70% in the vertical orientation. The lowest thermal resistance of 0.39 °C/W is achieved using acetone as a working fluid at 100 W. A Kutateladze number (Ku) was used to compare the experimental data and found to be suitable for prediction of the thermal performance of FP-OHP with standard deviation of 15%.Keywords
This publication has 50 references indexed in Scilit:
- Thermo-hydrodynamics analysis of vapor–liquid two-phase flow in the flat-plate pulsating heat pipeInternational Communications in Heat and Mass Transfer, 2012
- Robust Thermal Performance of a Flat-Plate Oscillating Heat Pipe During High-Gravity LoadingJournal of Heat Transfer, 2011
- An Investigation of Flat-Plate Oscillating Heat PipesJournal of Electronic Packaging, 2010
- Operating Characteristic Investigations in Pulsating Heat PipeJournal of Heat Transfer, 2006
- High speed flow visualization of a closed loop pulsating heat pipeInternational Journal of Heat and Mass Transfer, 2005
- EXPERIMENTAL STUDY OF A PULSATING HEAT PIPE USING FC-72, ETHANOL, AND WATER AS WORKING FLUIDSExperimental Heat Transfer, 2004
- Closed loop pulsating heat pipesApplied Thermal Engineering, 2003
- Understanding operational regimes of closed loop pulsating heat pipes: an experimental studyApplied Thermal Engineering, 2003
- Heat transfer in a pulsating heat pipe with open endInternational Journal of Heat and Mass Transfer, 2002
- Fast Drop Movements Resulting from the Phase Change on a Gradient SurfaceScience, 2001