The scaling effect of bored pile radius on unit shear capacity
Author:
- 1 October 2011
- journal article
- Published by Taylor & Francis in International Journal of Geotechnical Engineering
- Vol. 5 (4)
Abstract
The scaling effect, or influence of bored pile (drilled shaft) radius on unit shear capacity at a given displacement, is examined via a review of the literature as well as data collected in the field. It is apparent that the scaling effect of pile-soil load transfer is a measurable phenomenon on both the small scale and large scale. Since results from smaller-radius bored pile load tests are often used for the design of larger radius production piles, it may be advisable to scale down the unit shear capacity obtained from test results by the ratio of the test to production pile radii to conservatively account for the scaling effect.Keywords
This publication has 6 references indexed in Scilit:
- Analysis of the Effect of Pile Skin Resistance Verses Pile Diameter Based on Experimental ResearchAmerican Journal of Applied Sciences, 2009
- Scale effect in shaft friction from the direct shear interface testsArchives of Civil and Mechanical Engineering, 2006
- A new socket roughness factor for prediction of rock socket shaft resistanceCanadian Geotechnical Journal, 2001
- Finite cavity expansion in dilatant soils: loading analysisGéotechnique, 1991
- The strength and dilatancy of sandsGéotechnique, 1986
- Analysis of Deformation of Vertically Loaded PilesJournal of the Geotechnical Engineering Division, 1978