Energy Performance of Liquid Desiccant and Evaporative Cooling-Assisted 100% Outdoor Air Systems under Various Climatic Conditions
Open Access
Abstract
The main purpose of this study is to evaluate the applicability of a liquid desiccant and evaporative cooling-assisted 100% outdoor air system (LD-IDECOAS) in six typical cities in China. The six cities are located in different climatic zones in China and are selected because they are comparable owing to the outdoor air conditions. Many studies have shown that the annual operating energy consumption of LD-IDECOAS is nearly half compared with the conventional variable air volume (VAV) system. Because the climate characteristics of the six selected cities were different, the appropriate mode of operation of the LD-IDECAOS was applied to each studied city, and energy simulations were performed. Based on the design conditions of each region, the required cooling and heating loads were calculated for office buildings using transient system simulations (TRNSYS) 17, and the performance of the LD-IDECOAS and its energy consumption were simulated with a commercial engineering equation solver (EES) program. Depending on the climate characteristics of each city, adequate modifications were evaluated with simulations in terms of energy consumption. The proposed system was compared with the VAV system and the evaporative cooling assisted 100% outdoor air-conditioning system (IDECOAS) for detailed simulation results in the effort to evaluate the energy-saving potential. Finally, the results show that the proposed system saves considerable energy over conventional VAV systems and, in summer, the applications save even more energy than IDECOAS. However, there is a slight difference between the different geographical regions in terms of the annual operating energy consumption. In summary, the proposed system can yield significant energy-saving benefits in hot and humid regions whereas, in dry regions, the proposed system is more applicable in the summer. Consequently, LD-IDECOAS can be adopted for different climatic zones as a heating, ventilating, and air-conditioning (HVAC) system by introducing 100% outdoor air.Keywords
Funding Information
- Korea Agency for Infrastructure Technology Advancement (17CTAP–C116268–02, and 18CTAP-C141826-01)
- Korea Institute of Energy Technology Evaluation and Planning (KETEP) (No. 20164010200860)
This publication has 26 references indexed in Scilit:
- Thermal design of two-stage evaporative cooler based on thermal comfort criterionHeat and Mass Transfer, 2016
- Numerical heat and mass transfer analysis of a cross-flow indirect evaporative cooler with plates and flat tubesHeat and Mass Transfer, 2015
- THE LOCAL MEDIA RADIANT TEMPERATURE FOR THE CALCULATION OF COMFORT IN AREAS CHARACTERIZED BY RADIANT SURFACESInternational Journal of Heat and Technology, 2015
- Smart Control of Air Climatization System in Function on the Values of Mean Local Radiant TemperatureSmart Science, 2015
- Cooling performance of a 100% outdoor air system integrated with indirect and direct evaporative coolersEnergy, 2013
- Design and performance analysis of a small solar evaporative coolerEnergy Efficiency, 2013
- Energy performance of an evaporative cooler assisted 100% outdoor air system in the heating season operationEnergy and Buildings, 2012
- Energy conservation potential of an indirect and direct evaporative cooling assisted 100% outdoor air systemBuilding Services Engineering Research & Technology, 2011
- Experimental performance of a liquid desiccant dehumidification system under tropical climatesEnergy Conversion and Management, 2011
- Simulation of a hybrid liquid desiccant based air-conditioning systemApplied Thermal Engineering, 1997