Development of a Binderless Particleboard from Brown Seaweed Sargassum spp.
Open Access
Abstract
Since 2010, huge quantities of Sargassum spp. algae have been proliferating in the Atlantic Ocean and stranding on Caribbean beaches, causing major economic, environmental, and health problems. In this study, an innovative high-density binderless particleboard was developed using uniaxial thermo-compression coupled with a cooling system. The raw material consisted of ground Sargassum seaweeds pre-treated by twin-screw extrusion with water to remove sea salt. The raw material and the particleboards were produced by using various analytical techniques such as Dynamic Vapor Sorption (DVS), Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), or Thermogravimetric Analysis (TGA). The experimental conditions for thermo-compression (temperature, pressure, time) were evaluated. The best thermo-compression conditions tested were 200 °C, 40 MPa pressure for 7.5 min. This resulted in a particleboard with high density (up to 1.63 ± 0.02 g/cm3) and high flexural strength/modulus (up to 32.3 ± 1.8 MPa/6.8 ± 0.2 GPa, respectively), but a low water contact angle of 38.9° ± 3.5°. Thermal analyses revealed the effect of alginates on the mechanical properties of particleboards. This work opens the door to a new way of adding value to Sargassum seaweed, using the whole algae with minimal pre-treatment.Keywords
Funding Information
- ANR Sargassum program for “Holistic approach for Sargassum valorization-SARGOOD” (N°ANR-19-SARG-0002-02, N°ANR-18-EURE-0021)
- FAPESP (N°ANR-19-SARG-0002-02, N°ANR-18-EURE-0021)
- INTERREG Caraïbes (N°ANR-19-SARG-0002-02, N°ANR-18-EURE-0021)
- French National Research Agency “Investissement d’avenir” Program (N°ANR-19-SARG-0002-02, N°ANR-18-EURE-0021)
This publication has 47 references indexed in Scilit:
- Alginate biopolymers: Counteracting the impact of superabsorbent polymers on mortar strengthConstruction and Building Materials, 2016
- Determining the selectivity of divalent metal cations for the carboxyl group of alginate hydrogel beads during competitive sorptionJournal of Hazardous Materials, 2015
- Physical evaluation of biodegradable films of calcium alginate plasticized with polyolsBrazilian Journal of Chemical Engineering, 2013
- High Pressure Compression-Molding of α-Cellulose and Effects of Operating ConditionsMaterials, 2013
- Thermo-Mechanical Behaviour of the Raffinate Resulting from the Aqueous Extraction of Sunflower whole Plant in Twin-Screw Extruder: Manufacturing of Biodegradable Agromaterials by Thermo-PressingAdvanced Materials Research, 2010
- Characterization of insulin-loaded alginate nanoparticles produced by ionotropic pre-gelation through DSC and FTIR studiesCarbohydrate Polymers, 2006
- Chemical changes of kenaf core binderless boards during hot pressing (II): effects on the binderless board propertiesJournal of Wood Science, 2006
- Thermal studies on natural and modified gumsPolymer Testing, 2004
- Manufacture and mechanical properties of binderless boards from kenaf coreJournal of Wood Science, 2004
- Thermal depolymerization of alginate in the solid stateCarbohydrate Polymers, 2003