Plasma Etch Resistance Switching of oCVD Poly(3,4-Ethylenedioxythiophene) Thin Films via Mild Thermal Anneal and Liquid Water Exposure To Manipulate Antimony Incorporation
- 7 January 2026
- journal article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (2) , 4428-4440
Abstract
Thin, conformal poly(3,4-ethylenedioxythiophene) (PEDOT) films are rapidly deposited on Si and SiO2 via oxidative chemical vapor deposition (oCVD) using heated monomer and SbCl5. While this conjugated polymer has previously been reported as a candidate for hybrid optoelectronic device applications, it has also been recently demonstrated as a patterning material during area-selective deposition (ASD) processes to augment lithographic patterning. In this work, we extend the versatility of PEDOT by demonstrating the ability to dramatically change the rate of film etching during plasma exposure. While as-deposited films etch rapidly in O2 plasma and CHF3/Ar reactive ion etching (RIE), we find that after a mild 5 min anneal at 350 °C, the etch rate decreases by a factor of 30. Then, after annealing, we surprisingly find that rinsing the films for 10 min in DI H2O at 80 °C allows them to return to their original rapid-etch condition. The anneal step reduces film thickness, increases density, and leads to an increase in the relative concentration of Sb remaining from the SbCl5 oxidant used during deposition. High-angle annular dark-field (HAADF) imaging indicates that the Sb remains highly concentrated on the surface after annealing and etching. Under CHF3/Ar RIE conditions, the etch selectivity for SiO2 relative to the annealed films exceeds 40:1, which is larger than many other polymeric and dielectric hard masks. These results position PEDOT as a favorable ASD patterning material and plasma hard mask polymer.Keywords
Funding Information
- Semiconductor Research Corporation (3088.001)
This publication has 66 references indexed in Scilit:
- Enhancing Capacitance of Carbon Cloth Electrodes via Highly Conformal PEDOT Coating Fabricated by the OCVD Method Utilizing SbCl5 OxidantAdvanced Materials Interfaces, 2024
- Systematic and collaborative approach to problem solving using X-ray photoelectron spectroscopyApplied Surface Science Advances, 2021
- Optimizing the Optoelectronic Properties of Face‐On Oriented Poly(3,4‐Ethylenedioxythiophene) via Water‐Assisted Oxidative Chemical Vapor DepositionAdvanced Functional Materials, 2020
- Phase pure CuSbS2 thin films by heat treatment of electrodeposited Sb2S3/Cu layersJournal of Solid State Electrochemistry, 2020
- Device Fabrication Based on Oxidative Chemical Vapor Deposition (oCVD) Synthesis of Conducting Polymers and Related Conjugated Organic MaterialsAdvanced Materials Interfaces, 2018
- Conductivities enhancement of poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) transparent electrodes with diol additivesPolymer Bulletin, 2012
- Conductivity, morphology, interfacial chemistry, and stability of poly(3,4‐ethylene dioxythiophene)–poly(styrene sulfonate): A photoelectron spectroscopy studyJournal of Polymer Science Part B: Polymer Physics, 2003
- Electrochemical and spectroscopic characterization of polyalkylenedioxythiophenesJournal of Electroanalytical Chemistry, 1994
- Poly(alkylenedioxythiophene)s—new, very stable conducting polymersAdvanced Materials, 1992
- Conjugated Polymers1991