Pneumatic Drying of Iron Ore Particles in a Vertical Tube
Authors:
- Ph.DPHPh.D
- 5 January 2004
- journal article
- Published by Taylor & Francis in Drying Technology
- Vol. 22 (4) , 877-891
Abstract
The drying and hydrodynamic characteristics of iron ore particles in a vertical pneumatic conveying dryer (0.078 m ID × 6.0 m high) have been determined. The pressure drop decreases along the height at the acceleration region, while it remains constant irrespective of the height in the fully developed region. The degree of particle drying in the dilute pneumatic region increases with increasing superficial inlet gas velocity at constant inlet gas temperature and solid injection rate. However, it decreases with increasing solid injection rates at identical superficial inlet gas velocity and inlet gas temperature. The degree of particle drying increases from 48.6 to 82.5% as the inlet gas temperature increases from 100 to 400 °C.Keywords
This publication has 11 references indexed in Scilit:
- Pressure Drop in a Vertical Pneumatic Conveying of Iron OreIndustrial & Engineering Chemistry Research, 2002
- Drying of water treatment process sludge in a fluidized bed dryerKorean Journal of Chemical Engineering, 2000
- Flow regimes and axial pressure profiles in a circulating fluidized bedChemical Engineering Journal, 1999
- Exit effects in circulating fluidized bed risersThe Canadian Journal of Chemical Engineering, 1997
- NUMERICAL SIMULATION OF DRYING IN A CYCLONEDrying Technology, 1997
- Pneumatic drying: the use of large-scale experimental data in a design procedurePowder Technology, 1995
- High-pressure vertical pneumatic transport investigationPowder Technology, 1994
- SCALE-UP OF PNEUMATIC CONVEYING DRYERSDrying Technology, 1994
- Computational fluid dynamics modelling of vertical pneumatic conveying dryersPowder Technology, 1991
- A SCIENTIFIC APPROACH TO THE DESIGN OF CONTINUOUS FLOW DRYERS FOR PARTICULATE SOLIDSMultiphase Science and Technology, 1989