A model for analyzing stiffness and stress in a helical gear pair with tooth profile errors
Authors:
- 8 August 2016
- journal article
- research article
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 23 (2) , 272-289
Abstract
A model is introduced for analyzing the influence of tooth shape deviations and assembly errors on the helical gear mesh stiffness, loaded transmission error, tooth contact stress and tooth root stress. The helical gear is approximated as a series of independent spur gear slices along axial direction whose face-width is relatively small. The relative position relationships among those sliced teeth in mesh are developed with tooth profile errors and the stiffness of the sliced tooth is calculated by the potential energy method. From the equilibriums of the forces, gear mesh stiffness, loaded transmission error, tooth contact stress and tooth root stress are calculated. Then two cases are presented for validation of the model. It is demonstrated that the model is effective for calculating the stiffness of helical gear pairs. Finally, the effects of the tooth tip reliefs, lead crown reliefs and misalignments on the gear mesh stiffness, transmission error, tooth contact stress and tooth root stress are analyzed. The results show that mesh stiffness decreases, loaded transmission error, the maximum tooth contact stress and the maximum tooth root stress grow with the increasing tooth tip relief, lead crown relief and misalignment. And tooth edge has concentrated tooth contact stresses with a gear misalignment.Keywords
This publication has 28 references indexed in Scilit:
- Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crackMechanism and Machine Theory, 2013
- Load distribution model along the line of contact for involute external gearsMechanism and Machine Theory, 2010
- Analysis of General Characteristics of Transmission Error of Gears With Convex Modification of Tooth Flank Form Considering Elastic Deformation Under LoadJournal of Mechanical Design, 2009
- Effects of machining errors, assembly errors and tooth modifications on loading capacity, load-sharing ratio and transmission error of a pair of spur gearsMechanism and Machine Theory, 2007
- On the modelling of excitations in geared systems by transmission errorsJournal of Sound and Vibration, 2006
- Finite element simulation of the dynamical behavior of a speed-increase gearboxJournal of Materials Processing Technology, 2004
- A MATHEMATICAL MODEL FOR ANALYZING THE INFLUENCE OF SHAPE DEVIATIONS AND MOUNTING ERRORS ON GEAR DYNAMIC BEHAVIOURJournal of Sound and Vibration, 1996
- Hertzian Damping, Tooth Friction and Bending Elasticity in Gear Impact DynamicsJournal of Mechanical Design, 1987
- Deflection of Spur Gear Teeth Cut in Thin RimsJournal of Engineering for Industry, 1964
- The Additional Deflection of a Cantilever Due to the Elasticity of the SupportJournal of Applied Mechanics, 1960