Design and Construction of High-Performance Long-Span Steel Transfer Twin Trusses Applied in One Hospital Building in Hong Kong
Open Access
Abstract
Long-span steel trusses are increasingly used in high-rise buildings to replace reinforced concrete thick transfer plates due to their light weight but high load-bearing capacity. To support multiple stories above the steel transfer trusses, a comprehensive method based on second-order direct analysis has been applied for design optimization of long-span steel transfer trusses in one hospital redevelopment project in Hong Kong. In the project, several 35 m long-span steel transfer trusses are adopted at the 3rd to 5th floors to support the upper 15-story reinforced concrete structure. Innovative technologies such as integrated global and local optimization and integrated design and construction have been explored and made to achieve better uniformity and compatibility in structure. In particular, twin trusses with better structural performance, less fabrication cost and ease of constructability are studied and finally adopted in primary trusses to replace the original scheme of single trusses. The optimal scheme has brought both cost and time saving in fabrication, construction, operation and maintenance stages.Keywords
This publication has 22 references indexed in Scilit:
- Second-Order and Advanced Analysis of Structures Allowing for Load and Construction SequencesAdvances in Structural Engineering, 2011
- Integrated Reliability-Based Seismic Drift Design Optimization of Base-Isolated Concrete BuildingsJournal of Structural Engineering, 2010
- Second-Order Analysis and Design of Wall-Framed Structures Allowing for ImperfectionsAdvances in Structural Engineering, 2010
- Multiobjective Optimization for Performance-Based Design of Reinforced Concrete FramesJournal of Structural Engineering, 2007
- Optimal performance-based design of FRP jackets for seismic retrofit of reinforced concrete framesComposites Part B: Engineering, 2007
- Optimal seismic performance-based design of reinforced concrete buildings using nonlinear pushover analysisEngineering Structures, 2005
- Limitation of effective length method and codified second-order analysis and designSteel and Composite Structures, 2005
- Elastic and inelastic drift performance optimization for reinforced concrete buildings under earthquake loadsEarthquake Engineering & Structural Dynamics, 2004
- Exact Tangent Stiffness for Imperfect Beam-Column MembersJournal of Structural Engineering, 2000
- Second-Order Elastic Analysis of Frames Using Single Imperfect Element per MemberJournal of Structural Engineering, 1995