On the influence of boundary conditions when determining transport coefficients from finite samples of porous media. Assessment for tomographic images of real materials
Preprint
Abstract
The increasing access to 3d digital images of porous media provides an ideal avenue for the determination of their transport properties, by solving the governing equations in their actual microscale geometry and evaluating the tensor coefficient that relates the mean flux and driving gradient. However, the first and puzzling question along the way is the choice of the conditions to be imposed for this resolution at the boundaries of the sample. This methodological issue is explored here with the purpose of quantifying the influence of the boundary conditions (BC) in relation with the parameters of the system (porosity, characteristic length scale of the microstructure, ratio of the phase conductivities), assessing the level of confidence associated with the predictions , devising criteria to anticipate the risk of serious artifacts, and if possible proposing ways to limit them. Although the terminology of thermal transfer is used, the developments apply to the upscaling of any transport property governed by a diffusion equation, including thermal or electrical conduction, mass diffusion or Darcy flow. Quantitative indicators are introduced for a rigorous individual or comparative assessment of conductivity tensors, and they are used in the analysis of the results of extensive calculations based on four tomographic images of various kinds of porous materials, with a broad range of conductivity contrasts, and various kinds of BC's. Ultimately, practical criteria are proposed for the a priori and a posteriori detection of at-risk situations, and a self-diagnosing protocol is proposed to screen out the influence of the BC's, when this is possible.Keywords
All Related Versions
This publication has 23 references indexed in Scilit:
- A Comparison of Various Methods for the Numerical Evaluation of Porous Media Permeability Tensors from Pore-Scale GeometryMathematical Geosciences, 2015
- Permeability tensor of three‐dimensional fractured porous rock and a comparison to trace map predictionsJournal of Geophysical Research: Solid Earth, 2014
- Computations of Absolute Permeability on Micro-CT ImagesMathematical Geosciences, 2012
- 3D simulation of the permeability tensor in a soil aggregate on basis of nanotomographic imaging and LBE solverJournal of Soils and Sediments, 2011
- Geometric characterization, hydraulic behavior and upscaling of 3D fissured geologic mediaMathematics and Computers in Simulation, 2009
- Equivalent block transmissivity in an irregular 2D polygonal grid for one-phase flow: A sensitivity analysisComptes Rendus. Géoscience, 2009
- Permeability of 3D discontinuity networks: New tensors from boundary-conditioned homogenisationAdvances in Water Resources, 2009
- Analysis of Hydraulic Permeability in Porous Media: From High Resolution X-ray Tomography to Direct Numerical SimulationTransport in Porous Media, 2009
- Tomography based determination of permeability, Dupuit–Forchheimer coefficient, and interfacial heat transfer coefficient in reticulate porous ceramicsInternational Journal of Heat and Fluid Flow, 2008
- Use of Border Regions for Improved Permeability UpscalingMathematical Geology, 2003