Numerical Simulation and Validation of Laser Polishing of Alumina Ceramic Surface
Open Access
- 29 October 2023
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 14 (11) , 2012
Abstract
Laser polishing is a noncontact and efficient processing method for surface treatment of different materials. It removes surface material and improves its quality by means of a laser beam that acts directly on the surface of the material. The material surface roughness is a major criterion that evaluates the polishing effect when alumina ceramics are polished by a laser. In this study, the effects of three factors, namely, laser power, scanning speed, and pulse frequency, on the surface roughness were investigated through orthogonal tests. The optimum polishing parameters were obtained through a comparison of the experimental results. Compared to the initial surface roughness (Ra = 1.624 μm), the roughness of the polished surface was reduced to Ra = 0.549 μm. A transient two-dimensional model was established by the COMSOL Multiphysics 5.5, and the flow condition of the material inside the molten pool of laser-polished alumina ceramics and the surface morphology of the smoothing process were investigated by utilizing the optimal polishing parameters obtained from the experiments. The simulation results showed that in the process of laser polishing, the fluid inside the molten pool flowed from the peaks to the valleys under the action of capillary force, and the inside of the molten pool tended to be smoothened gradually. In order to verify the correctness of the numerical model, the surface profile at the same position on the material surface was compared, and the results showed that the maximum error between the numerical simulation and the experimental results was 17.8%.Keywords
Funding Information
- the Technology Innovation Platform Project of Shenzhen Institute of Information Technology (PT2020E002, 2018, PT2021B001, 2022CJPT019, 21A0117)
- Guangdong Province Higher Vocational Colleges and Schools Pearl River Scholar Funded Scheme (PT2020E002, 2018, PT2021B001, 2022CJPT019, 21A0117)
- the Project of Science and Technology Department of Guangdong Province (PT2020E002, 2018, PT2021B001, 2022CJPT019, 21A0117)
- the Project of Education Department of Guangdong Province (PT2020E002, 2018, PT2021B001, 2022CJPT019, 21A0117)
- the Education Department of Hunan Province (PT2020E002, 2018, PT2021B001, 2022CJPT019, 21A0117)
This publication has 26 references indexed in Scilit:
- Pulsed laser micro polishing: Surface prediction modelJournal of Manufacturing Processes, 2012
- Laser machining of structural ceramics—A reviewJournal of the European Ceramic Society, 2009
- Examination of Selective Pulsed Laser Micropolishing on Microfabricated Nickel Samples Using Spatial Frequency AnalysisJournal of Manufacturing Science and Engineering, 2009
- Laser milling of ceramic componentsInternational Journal of Machine Tools and Manufacture, 2007
- Surface Tension and Viscosity Measurements of Liquid and Undercooled Alumina by Containerless TechniquesJapanese Journal of Applied Physics, 2005
- Theoretical analysis of material removal mechanisms in pulsed laser fusion cutting of ceramicsJournal of Physics D: Applied Physics, 2005
- Comparison of volumetric and surface heating sources in the modeling of laser melting of ceramic materialsInternational Journal of Heat and Mass Transfer, 2004
- Application trend in advanced ceramic technologiesTechnovation, 2001
- Carbon dioxide laser polishing of fused silica surfaces for increased laser-damage resistance at 1064 nmApplied Optics, 1982
- Thermal Conductivity: VII, Analysis of Variation of Conductivity with Temperature for Al2O3, BeO, and MgOJournal of the American Ceramic Society, 1954