Heat transfer characteristics of high crossflow impingement channels: Effect of number of holes
- 6 July 2015
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
- Vol. 229 (5) , 560-568
Abstract
In modern turbine airfoils, narrow impingement cooling channels can be formed in a double-wall configuration. In these wall-integrated cooling cavities, the generated crossflow is one of the most important design factors, and hence, the number of impingement holes included in a channel. This study examines experimentally the influence of the number of impingement holes on the heat transfer characteristics of narrow impingement channels. The channels consist of two rows of jets where the number of holes in the axial direction is varied from 5 to 10, maintaining the same jet plate open area. Local heat transfer coefficient distributions are obtained for all channel interior walls using the transient liquid crystal technique and over a range of Reynolds numbers (20,300–41,500). The results show an important heat transfer degradation at higher open areas and a small influence of the number of holes at upstream channel positions.Keywords
This publication has 25 references indexed in Scilit:
- Detailed Heat Transfer Distributions of Narrow Impingement Channels for Cast-In Turbine AirfoilsJournal of Turbomachinery, 2014
- Effects of Rotation on Heat Transfer for a Single Row Jet Impingement Array With CrossflowJournal of Heat Transfer, 2012
- Multiple Jet Impingement - A ReviewHeat Transfer Research, 2011
- Sidewall Effects on Heat Transfer Coefficient in a Narrow Impingement ChannelJournal of Thermophysics and Heat Transfer, 2010
- Turbine Airfoil Aerothermal Characteristics in Future Coal—Gas-Based Power Generation SystemsHeat Transfer Research, 2010
- The Effect of Initial Cross Flow on the Cooling Performance of a Narrow Impingement ChannelJournal of Heat Transfer, 2005
- Full Surface Local Heat Transfer Coefficient Measurements in a Model of an Integrally Cast Impingement Cooling GeometryJournal of Turbomachinery, 1998
- Impingement Heat Transfer Within Arrays of Circular Jets: Part 1—Effects of Minimum, Intermediate, and Complete Crossflow for Small and Large SpacingsJournal of Heat Transfer, 1987
- Impingement of a circular jet with and without cross flowInternational Journal of Heat and Mass Transfer, 1982
- Impingement cooling from a circular jet in a cross flowInternational Journal of Heat and Mass Transfer, 1975