Abstract
This article presented a high-sensitivity resonant differential pressure microsensor based on wafer-level eutectic bonding, where dual resonators were embedded in the pressure-sensitive diaphragm to sense differential pressures, and a silicon cap was used to form a vacuum cavity. Differential pressures applied to the developed microsensor caused deflections of the pressure-sensitive diaphragm, resulting in shifts in resonant frequencies. This microsensor was designed based on finite element simulations with optimized structural parameters, which indicated high differential pressure sensitivities. Micro fabrications with key processes of deep reactive-ion etching (DRIE), lithography, and wafer-level eutectic bonding were adopted for device fabrication. The following experimental characterizations were conducted, producing the differential-pressure sensitivity of 181.53 Hz/kPa, the maxing fitting error of less than 80 Pa, under the differential pressure range of 0–100 kPa, the static pressure range of 110–200 kPa, and the temperature range of −10 °C to 60 °C. These results show that developed resonant differential pressure microsensors have excellent performances for differential-pressure measurements.
Funding Information
  • National key research and development program (2022YFB3204900)
  • National Science Fund for Distinguished Young Scholars (61825107)
  • NSFC (62121003)
  • the Joint Fund of the National Natural Science Foundation of China and the China Academy of Engineering Physics (U1930206)
  • National Natural Science Foundation of China (62201549)
  • Instrument Research and Development of Chinese Academy of Sciences (GJJSTD20210004)

This publication has 24 references indexed in Scilit: