Comparison of Heat Transfer Characteristics of the Hollow-Shaft Oil Cooling System for High-Speed Permanent Magnet Synchronous Machines
- 13 June 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (5) , 6081-6092
Abstract
The rotor cooling poses a significant challenge for high-speed permanent magnet synchronous machines. This article presents a recirculating hollow-shaft oil cooling structure. Through the computational fluid dynamics (CFD) method, its convective heat transfer characteristics are studied in depth. Besides, the recirculating hollow-shaft cooling (RHSC) is compared with the direct-through hollow-shaft cooling (DHSC). Based on the CFD analysis, it is found that the convective heat transfer coefficient (CHTC) of the RHSC is higher than that of the DHSC, which can be as high as 58%. Furthermore, the advantage of the RHSC is most prominent at low rotational speed and small flow rate due to its relatively large oil friction loss at a high rotational speed. Moreover, the explanation for the fluctuation of the CHTC before the critical rotational speed, as well as the law of its variation with rotational speed and flow rate, are revealed in this study. The correctness of the simulation analysis is verified by experiments implemented on a rotor setup. In order to summarize the convective heat transfer law of the RHSC better, a dimensionless empirical equation is fitted finally.Keywords
Funding Information
- National Postdoctoral Program for Innovative Talents of China (BX20190130)
- Science and Technology on Ship Integrated Power System Technology Laboratory (6142217200202)
This publication has 29 references indexed in Scilit:
- Development of an interior permanent magnet motor through rotor cooling for electric vehiclesApplied Thermal Engineering, 2016
- High-Performance Low-Cost Electric Motor for Electric Vehicles Using Ferrite MagnetsIEEE Transactions on Industrial Electronics, 2015
- Advanced High-Power-Density Interior Permanent Magnet Motor for Traction ApplicationsIEEE Transactions on Industry Applications, 2014
- Thermal performance of oil spray cooling system for in-wheel motor in electric vehiclesApplied Thermal Engineering, 2014
- A new cooling approach for traction motors in hybrid drives2013
- A Liquid-Cooled Rotor for High Density Electric Machines2011
- Analysis of effeciency of cooling system of hollow-shaft automotive alternatorRussian Electrical Engineering, 2010
- Convective heat transfer inside a rotating cylinder with an axial air flowInternational Journal of Thermal Sciences, 2006
- Fluide flow and heart transfer inan axially roatating pipe—II. Effect of rotation on laminar pipe flowInternational Journal of Heat and Mass Transfer, 1989
- Flow of a Fluid in an Axially Rotating PipeJournal of Mechanical Engineering Science, 1964