LES Modeling of Premixed Deflagrating Flames in a Small-Scale Vented Explosion Chamber with a Series of Solid Obstructions
- 16 September 2008
- journal article
- conference paper
- Published by Taylor & Francis in Combustion Science and Technology
- Vol. 180 (10-11) , 1936-1955
Abstract
In this study, simulations of propagating turbulent premixed deflagrating flames past built in solid obstructions in a laboratory scale explosion chamber has been carried out with the Large Eddy Simulation (LES) technique. The design of the chamber allows for up to three baffle plates to be positioned in the path of propagating flame, rendering different configurations, hence generating turbulence and modifying the structure of the reaction zone. Five important configurations are studied to understand the feedback mechanism between the flame-flow interactions and the burning rate. In LES, the sub-grid scale (SGS) reaction rate should be accounted for by an appropriate model that can essentially capture the physics. The present work has been carried by using the flame surface density (FSD) model for sub-grid scale reaction rate. The influence of the flow on turbulence and flame propagation as a result of the in-built solid obstructions is also examined. The impact of the number and the position of such baffle plates on the generated overpressure, flame speed and structure are studied. Results from the simulations are compared with experimental data for five configurations and they show good agreement.Keywords
This publication has 43 references indexed in Scilit:
- LARGE EDDY SIMULATION OF TURBULENT PREMIXED COMBUSTION USING A MARKER FIELDCombustion Science and Technology, 2007
- Accelerating flames in tubes—an analysisProceedings of the Combustion Institute, 2007
- Flame oscillations in tubes with nonslip at the wallsCombustion and Flame, 2006
- Problems of predicting turbulent burning ratesCombustion Theory and Modelling, 2002
- Flame acceleration due to flame-induced instabilities in large-scale explosionsCombustion and Flame, 2001
- Large Eddy Simulation of Combustion Instabilities in a Jet Engine Afterburner ModelCombustion Science and Technology, 2000
- Studies of premixed flame propagation in explosion tubesCombustion and Flame, 1999
- Premixed-flame propagation in turbulent Taylor–Couette flowCombustion and Flame, 1998
- Direct numerical simulation analysis of flame surface density concept for large eddy simulation of turbulent premixed combustionSymposium (International) on Combustion, 1998
- Studies of the turbulent burning velocityProceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences, 1990