Operating induction motor drives with turn-to-turn faults
- 1 January 2005
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 770-776
Abstract
This paper examines part functionality of a five phase vector controlled induction motor drive following a winding fault. The ability of vector controlled induction-motor drives to continue operating with different numbers of shorted turns in one coil of the stator winding is examined. A simple thermal model of the coil is used to examine the duration the fault that can be allowed to exist before there is further degradation of the insulation. Simulation results given by a dynamic mesh reluctance model of the machine incorporate saturation and slotting effects. Shorting small numbers of turns gives very little time before further failures could occur. Shorts of large numbers of turns change machine flux levels, saturation and effective torque constant. By reducing the magnetising current, the short circuit current decreases, the torque developed improves and temperature rise is limited. Part functionality following a winding fault might aid controlled, drive shutdown or provide an idling mode in multi-actuator, aircraft, flight-actuation-systems. This could be particularly helpful with electromechanical actuatorsKeywords
This publication has 7 references indexed in Scilit:
- The impact of matrix converter technology on motor design for an integrated flight control surface actuation system2003
- Fault tolerant three-phase AC motor drive topologies; a comparison of features, cost, and limitations2003
- A strategy for improving reliability of field oriented controlled induction motor drives2002
- Rotor field oriented control of five-phase induction motor with the combined fundamental and third harmonic currents2002
- The detection of inter-turn short circuits in the stator windings of operating motorsIEEE Transactions on Industrial Electronics, 2000
- Analysis and simulation of five-phase variable-speed induction motor drives under asymmetrical connectionsIEEE Transactions on Power Electronics, 1998
- Transient analysis of cage induction machines under stator, rotor bar and end ring faultsIEEE Transactions on Energy Conversion, 1995