Performance of Inverter Fed HTS Induction-Synchronous Motor Operated in Liquid Nitrogen
Authors:
- 23 July 2007
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 17 (2) , 1615-1618
Abstract
We studied the effects of changing the driving of a squirrel-cage type induction motor with high Tc superconducting (HTS) rotor windings. Bi-2223/Ag tape conductors were utilized for the secondary windings and the conventional (normal conducting) stator, 3-phase and 4-pole, was introduced. The fabricated motor was installed in the metal cryostat, and no-load tests were carried out in liquid nitrogen (77 K). A PWM (pulse width modulation) inverter was utilized in order to drive the motor. The test results are discussed based on the nonlinear electrical equivalent circuit. It is shown that the fabricated motor operates not only at slippage mode but also at synchronous mode for the frequency range from 10 Hz to 60 Hz. Furthermore, the rotating characteristics had frequency dependence, and higher input voltage was necessary for synchronism as the driving frequency increased. These characteristics were explained based on the conventional theoretical discussion and the nonlinear current transport property of HTS windings.Keywords
This publication has 6 references indexed in Scilit:
- Fabrication and Characteristics of HTS Induction Motor by the Use of Bi-2223/Ag Squirrel-Cage RotorIEEE Transactions on Applied Superconductivity, 2006
- High-Temperature Superconducting Rotating Machines for Ship ApplicationsIEEE Transactions on Applied Superconductivity, 2006
- Theoretical analysis of a YBCO squirrel-cage type induction motor based on an equivalent circuitSuperconductor Science and Technology, 2006
- Development of a HTS Squirrel Cage Induction Motor With HTS Rotor BarsIEEE Transactions on Applied Superconductivity, 2004
- Test of an induction motor with HTS wire at end ring and barsIEEE Transactions on Applied Superconductivity, 2003
- Transport Characteristics in YBCO Thin Films under Applying DC and AC Currents1999