Fabrication cost analysis for 2D, 2.5D, and 3D IC designs
Authors:
- 1 January 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
The interposer-based 2.5D technology has some advantages that are provided in the 3D technology, such as low interconnect delay, and high bandwidth, etc. In addition, the 2.5D technology can mitigate area overhead of TSVs and help reduce the temperature and binding cost. An extra interposer layer, however, is introduced for interconnect in a 2.5D design. With 2D, 2.5D, and 3D design options, the fabrication cost is an important metric to decide which technology should be adopted for different designs. In this paper, we present a cost estimation method for 2.5D ICs by extending a 3D floorplanning tool and the 3D cost models. This method can provide an estimated cost comparison among three technologies as a reference of choosing the strategy during the early design stage. We apply our method to several design benchmarks and compare the cost with different design strategies. Moreover, the interconnect delay and temperature results are also provided for comparison.Keywords
This publication has 7 references indexed in Scilit:
- The Most Cost-Effective Integrator (TSV Interposer) for 3D IC Integration System-in-Package (SiP)2011
- Fabrication Cost Analysis and Cost-Aware Design Space Exploration for 3-D ICsIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2010
- Development of through silicon via (TSV) interposer technology for large die (21×21mm) fine-pitch Cu/low-k FCBGA package2009
- Design space exploration for 3D architecturesACM Journal on Emerging Technologies in Computing Systems, 2006
- Interconnect and thermal-aware floorplanning for 3D microprocessors2006
- Silicon interposer technology for high-density package2002
- Interconnect characteristics of 2.5-D system integration scheme2001