Experimental Evaluation of Static Cyclic In-Plane Shear Behavior of Unreinforced Masonry Walls Strengthened with NSM FRP Strips
Authors:
- 1 June 2015
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 19 (3)
Abstract
An experimental study was conducted to assess the effectiveness of strengthening unreinforced-masonry (URM) shear panels with near surface-mounted (NSM) fiber-reinforced polymer (FRP) strips. A total of 23 wall panels (5 URM and 18 reinforced) were subjected to vertical precompression combined with either monotonic or increasing reversing cycles of in-plane lateral displacement under fixed-fixed boundary conditions. Two wall aspect ratios (height/length) and six different reinforcement schemes were tested. The experimental program was designed to produce diagonal cracking in the URM specimens and hence investigate the effectiveness of the various reinforcement schemes in controlling this failure mode. This was achieved for the aspect ratio 1 wall panels. The study revealed that the FRP strengthening was effective in improving the ultimate load, displacement capacity, ductility, and energy dissipation compared with the URM response. For the aspect ratio 0.5 panels, base sliding failures dominated the experimental program, making it difficult to fully assess the effectiveness of the various reinforcing schemesKeywords
This publication has 14 references indexed in Scilit:
- Static cyclic in-plane shear response of damaged masonry walls retrofitted with NSM FRP strips – An experimental evaluationEngineering Structures, 2013
- Experimental analysis of historic masonry walls reinforced by CFRP under in-plane cyclic loadingComposite Structures, 2011
- Diagonal Compression Testing of FRP-Retrofitted Unreinforced Clay Brick Masonry WallettesJournal of Composites for Construction, 2011
- Enhancement in in-plane shear capacity of unreinforced masonry (URM) walls strengthened with fiber reinforced polymer compositesComposites Part B: Engineering, 2011
- Performance of Unreinforced Masonry Buildings During the 2010 Darfield (Christchurch, Nz) EarthquakeAustralian Journal of Structural Engineering, 2010
- Experimental Response of Externally Retrofitted Masonry Walls Subjected to Shear LoadingJournal of Composites for Construction, 2008
- In-plane shear performance of masonry panels strengthened with FRPComposites Part B: Engineering, 2007
- Shear strength of URM walls retrofitted using FRPEngineering Structures, 2006
- In-Plane Seismic Response of URM Walls Upgraded with FRPJournal of Composites for Construction, 2005
- Evaluation of ductility of structures and structural assemblages from laboratory testingBulletin of the New Zealand Society for Earthquake Engineering, 1989