Investigation of the influence of wire preheating current on dilution and angular distortion on thick plate of ASTM A709-Gr 36 steel
- 3 June 2021
- journal article
- research article
- Published by Taylor & Francis in Welding International
- Vol. 35 (4-6) , 127-137
Abstract
In this work, the influence of preheat current of wire on weld quality is investigated using water cooled ASAW process. The weld quality depends on direct process parameters and types of welding, which further influence the mechanical properties of weldments. To achieve the better weld quality, it is utter to understand the effect of process parameters on response like area of penetration, area of reinforcement, dilution, and angular distortion. Initially, the experiments were carried out using bead on plate (BOP) technique on micro-alloyed ASTM A709 Gr-36 steel. Further, the mathematical models were developed using the response surface methodology with centre composite design technique. Then, ANOVA, F, and lack of fit tests were used to verify the statistical significance of the mathematical models. The individual and interaction effect of process parameters on response were investigate using perturbation and 3D surface graphs. Finally, the desirability and JAYA algorithm were used to optimize the process parameters to obtain optimum parameters for improving the welding performance. Preheat current has been showed a significant impact on the dilution and angular distortion.Keywords
Funding Information
- not receive any specific grant from funding
This publication has 20 references indexed in Scilit:
- Mathematical modeling of effect of polarity on weld bead geometry in submerged arc weldingJournal of Manufacturing Processes, 2016
- Effect of heat input on weld bead geometry of submerged arc welded ASTM A709 Grade 50 steel jointsJournal of Materials Processing Technology, 2012
- Effect of vanadium and titanium modification on the microstructure and mechanical properties of a microalloyed HSLA steelMaterials Science and Engineering: A, 2010
- Microstructure and Tensile Properties of Submerged Arc Welded 1.25Cr-0.5Mo Steel JointsMaterials and Manufacturing Processes, 2008
- Effect of Welding Parameters on the Size of Heat Affected Zone of Submerged Arc WeldingMaterials and Manufacturing Processes, 2000
- Influence of heat input and travel speed on microstructure and mechanical properties of double tandem submerged arc high strength low alloy steel weldmentsScience and Technology of Welding and Joining, 2000
- Prediction and comparison of the area of the heat-affected zone for the bead-on-plate and bead-on-joint in submerged arc welding of pipesJournal of Materials Processing Technology, 1999
- Effect of increasing deposition rate on the bead geometry of submerged arc weldsJournal of Materials Processing Technology, 1997
- Effect of submerged arc process variables on dilution and bead geometry in single wire surfacingJournal of Materials Processing Technology, 1993
- Electrode melting and plate melting efficiencies of submerged arc welding and gas metal arc weldingMaterials Science and Technology, 1990