Study on corrosion mechanism of high-nitrogen steel laser-arc hybrid welded joints
Open Access
- 1 October 2020
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 7 (10) , 106531
Abstract
In this paper, the electrochemical microcorrosion behavior of High-nitrogen steel hybrid weld joints with different wires addition were investigated. Polarization curves measurement was conducted to evaluate the corrosion feature in 3.5% NaCl solution. Scanning electron microscopy (SEM) and x-ray diffraction (XRD) were used to analyze the specific corrosion behavior and pitting deepening mechanism induced by precipitated ferrite-dendrites. The experimental results showed that the addition of nitrogen-containing welding wire improved the corrosion resistance of whole weld joint. As a transitional region, the HAZ exhibited relative weak pitting resistance and severe shedding behavior. The coherent dendrites and similar complex geometries led to the accumulation of continuous corrosion channels. The XPS spectra results indicated that the additional nitrogen in the welding wire optimized oxide composition of the surface passive film.Keywords
This publication has 35 references indexed in Scilit:
- Pitting corrosion of welded joints of austenitic stainless steels studied by using an electrochemical minicellCorrosion Science, 2008
- Effects of nitrogen on deformation-induced martensitic transformation in metastable austenitic Fe–18Cr–10Mn–N steelsScripta Materialia, 2008
- Effect of TIG welding on corrosion behavior of 316L stainless steelMaterials Letters, 2007
- Porosity and Nitrogen Content of Weld Metal in Laser Welding of High Nitrogen Austenitic Stainless SteelISIJ International, 2007
- Sensitization behaviour of modified 316N and 316L stainless steel weld metals after complex annealing and stress relieving cyclesJournal of Nuclear Materials, 2006
- Welding of High Nitrogen SteelsMaterials and Manufacturing Processes, 2004
- Manufacturing and Applications of High Nitrogen SteelsMaterials and Manufacturing Processes, 2004
- The influence of nitrogen on the passivation of stainless steelsCorrosion Science, 1996
- The influence of nitrogen and molybdenum on passive films formed on the austenoferritic stainless steel 2205 studied by AES and XPSCorrosion Science, 1995
- Synergism of alloying elements and pitting corrosion resistance of stainless steelsCorrosion Science, 1993