Sensor-Based Structural Health Monitoring of Composite Laminates Under Low-Velocity Impact
Open Access
- 18 March 2026
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 16 (6) , 2914
Abstract
Low-velocity impacts during manufacturing and maintenance (e.g., tool drops) can induce barely visible impact damage in composite aircraft structures, motivating sensing-assisted approaches for rapid post-event assessment. This study proposes and validates a strain-based structural health monitoring framework for carbon-fiber-reinforced polymer (CFRP) panels by combining surface-mounted strain gauges with explicit finite element analysis (FEA). Drop-weight tests were con-ducted in accordance with ASTM D7136 using a 1.0 kg hemispherical impactor at drop heights of 250–400 mm. Three strain gauges were positioned at 1.25 mm, 32.5 mm, and 52.5 mm from the impact point to quantify the spatial attenuation of peak surface strain. The measured peak strains exhibited clear-dependent decay and increased with impact energy up to 350 mm, whereas the 400 mm case showed a non-monotonic response and a pronounced deviation from an elastic energy-scaling baseline, consistent with a transition to damage-dominated energy dissipation. Dedicated MSC Apex/Nastran Implicit simulations reproduced experimental trends and provided a physics-based digital twin for interpreting strain signatures in elastic regions, correlating them with likely damage states.Keywords
This publication has 46 references indexed in Scilit:
- Finite element analysis on impact response and damage mechanism of composite laminates under single and repeated low-velocity impactAerospace Science and Technology, 2022
- Repeated low-velocity impact responses of SiC particle reinforced Al metal-matrix compositesCeramics International, 2022
- An experimental investigation on the low-velocity impact performance of the CFRP filled with nanoclayAerospace Science and Technology, 2021
- Low velocity impact and compression after impact simulation of thin ply laminatesComposites Part A: Applied Science and Manufacturing, 2018
- Structural health monitoring (SHM) of aerospace composites2015
- Computational Techniques for Structural Health Monitoring2011
- Identification of Damage Using Lamb Waves2009
- Health Monitoring of Aerospace Structures2003
- Review of low-velocity impact properties of composite materialsComposites Part A: Applied Science and Manufacturing, 1996
- The impact resistance of composite materials — a reviewComposites, 1991