Electrochemical behaviour and analysis of Zn-Ni alloy anti-corrosive coatings deposited from citrate baths
Authors:
Open Access
- 24 December 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 458 (1) , 012005
Abstract
Zinc-Nickel alloy coatings have been widely used to improve the corrosion resistance of steels. Electrodeposition of zinc-nickel alloy films on a steel plate under various deposition conditions is studied. The effects of plating variables such as bath composition, pH and current density on the coating composition, morphology and corrosion property have been systematically investigated. The zinc and nickel ions in plating baths are stabilized using complexing agent potassium citrate. Increasing the molar concentration of potassium citrate extends the pH of nickel hydroxide and zinc oxide precipitation. The morphological properties and crystalline phase structure of the deposited alloy coatings are examined by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The analyses reveal that the coatings deposited from citrate bath contain γ-NiZn3 and γ-Ni2Zn11 alloy phases. These phases improve the corrosion resistance of the steel plate. Electrochemical behaviour analyses of the Zn-Ni film illustrated by electrochemical impedance spectroscopy (EIS) measurement revealed that the sample (a) deposited from 0.0326M citrate bath at acidic pH shown higher impedance modulus than non-citrate bath coated samples, which improved anti-corrosive properties of the coatings. This study confirms that uniform Zn-Ni coating with smaller grain sizes has better anti-corrosive properties.Keywords
This publication has 18 references indexed in Scilit:
- Structural and corrosion protection properties of electrochemically deposited nano-sized Zn–Ni alloy coatingsApplied Surface Science, 2014
- Characterization of corrosion resistance of electrodeposited Zn–Ni Zn and Cd coatingsElectrochimica Acta, 2013
- A Study on Corrosion Behavior of Electrodeposited Zn-Rutile TiO2 Composite CoatingsSynthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 2012
- Comparative study on structure, corrosion and hardness of Zn–Ni alloy deposition on AISI 347 steel aircraft materialJournal of Alloys and Compounds, 2012
- Electrodeposition of Cu–Zn alloy coatings from citrate baths containing benzotriazole and cysteine as additivesJournal of Applied Electrochemistry, 2010
- Reverse pulse electrodeposition of Zn–Ni alloys from a chloride bathJournal of Alloys and Compounds, 2009
- Electrochemical studies of Zn–Ni alloy coatings from non-cyanide alkaline bath containing tartrate as complexing agentSurface and Coatings Technology, 2008
- Chemical treatment of zinc surface and its corrosion inhibition studiesBulletin of Materials Science, 2008
- Zinc-Nickel alloy coatings electrodeposited by pulse current and their corrosion behaviorJournal of Coatings Technology and Research, 2006
- Synthesis and characterization of electrodeposited nanocrystalline nickel–iron alloysMaterials Science and Engineering: A, 2003