Advanced Soft- and Hard-Magnetic Material Models for the Numerical Simulation of Electrical Machines
- 14 September 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 54 (11) , 1-8
Abstract
Accurate modeling of soft- and hard-magnetic materials for the numerical simulation of rotating electrical machines is required to allow predictions on the operational characteristics along the torque–speed map, already in the design stage. The full potential of most appropriate material selection and concurrent geometry adaption can only be utilized if models can represent actual material behavior. The accurate prediction of iron losses of soft-magnetic materials for various frequencies and magnetic flux densities, as well as the degradation due to manufacturing is eminent for the design of electrical machines. Therefore, advanced material models need to be adapted and their accuracy examined to further improve the modeling and enable progression. This paper will give an overview of the current modeling approaches applied at the Institute of Electrical Machines for soft- and hard-magnetic materials in the simulation of rotating electrical machines. A case example in the form of a traction drive is presented to which the models are applied. For the machine modeling, the inhouse solver pyMOOSE is utilized. In order to determine the losses with regard to manufacturing processes, the iron-loss model with material degradation is used in combination with a machine simulation scheme of the entire operating range of the machine. Here, various simulation approaches are combined to form the entire computational toolchain to obtain accurate results in the entire operational range.Keywords
This publication has 35 references indexed in Scilit:
- Semi-physical parameter identification for an iron-loss formula allowing loss-separationJournal of Applied Physics, 2013
- Importance of punching and workability in non-oriented electrical steel sheetsJournal of Magnetism and Magnetic Materials, 2008
- Magnetic characterisation of elastically and plastically tensile strained non-oriented Fe–3.2%Si steelJournal of Magnetism and Magnetic Materials, 2003
- The effect of the guillotine clearance on the magnetic properties of electrical steelsJournal of Magnetism and Magnetic Materials, 2003
- Effect of punching on electrical steels: Experimental and numerical coupled analysisIEEE Transactions on Magnetics, 2000
- Aspects of the cut-edge effect stress on the power loss and flux density distribution in electrical steel sheetsJournal of Magnetism and Magnetic Materials, 2000
- Influence of the manufacturing process on the magnetic properties of non-oriented electrical steelsJournal of Magnetism and Magnetic Materials, 2000
- Influence of cutting strains on the magnetic anisotropy of fully processed silicon steelJournal of Magnetism and Magnetic Materials, 1982
- Iron and silicon-iron alloysIEEE Transactions on Magnetics, 1971
- Calculation of the Energy Loss in Magnetic Sheet Materials Using a Domain ModelJournal of Applied Physics, 1958