A Simulation Environment for Benchmarking Sensor Fusion-Based Pose Estimators
Open Access
- 19 December 2015
- Vol. 15 (12) , 32031-32044
Abstract
In-depth analysis and performance evaluation of sensor fusion-based estimators may be critical when performed using real-world sensor data. For this reason, simulation is widely recognized as one of the most powerful tools for algorithm benchmarking. In this paper, we present a simulation framework suitable for assessing the performance of sensor fusion-based pose estimators. The systems used for implementing the framework were magnetic/inertial measurement units (MIMUs) and a camera, although the addition of further sensing modalities is straightforward. Typical nuisance factors were also included for each sensor. The proposed simulation environment was validated using real-life sensor data employed for motion tracking. The higher mismatch between real and simulated sensors was about 5% of the measured quantity (for the camera simulation), whereas a lower correlation was found for an axis of the gyroscope (0.90). In addition, a real benchmarking example of an extended Kalman filter for pose estimation from MIMU and camera data is presented.Keywords
This publication has 18 references indexed in Scilit:
- Magnetometer-Augmented IMU Simulator: In-Depth ElaborationSensors, 2015
- Camera-IMU-based localization: Observability analysis and consistency improvementThe International Journal of Robotics Research, 2013
- A Comparison between Different Error Modeling of MEMS Applied to GPS/INS Integrated SystemsSensors, 2013
- Multi-Magnetometer Based Perturbation Mitigation for Indoor Orientation EstimationNAVIGATION: Journal of the Institute of Navigation, 2011
- Visual-Inertial Sensor Fusion: Localization, Mapping and Sensor-to-Sensor Self-calibrationThe International Journal of Robotics Research, 2010
- Automated Software Testing for MatlabComputing in Science & Engineering, 2009
- Head Orientation Prediction: Delta Quaternions Versus QuaternionsIEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 2009
- Hand–Eye Calibration Applied to Viewpoint Selection for Robotic VisionIEEE Transactions on Industrial Electronics, 2008
- Distinctive Image Features from Scale-Invariant KeypointsInternational Journal of Computer Vision, 2004
- Use of the Hough transformation to detect lines and curves in picturesCommunications of the ACM, 1972