Electrochemical Acceleration of Hydrogen Transfer Through a Methanol Impermeable Metallic Barrier
Authors:
- 1 January 2003
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 150 (12) , A1583-A1588
Abstract
Placing a hydrogen conducting, methanol impermeable metallic barrier like palladium (Pd) is a well-known method for preventing methanol crossover through solid polymer electrolyte for direct methanol fuel cells (DMFCs). It was demonstrated in our study that the hydrogen transfer rate through the barrier was greatly enhanced when a negative bias potential in reference to the cell anode was applied on the barrier, a thin Pd foil of 25 μm thick. The power consumed for such bias application was less than 2% of the operational power of the cell. The current density/voltage curves of the DMFC showed that the proper bias application on the hydrogen saturated Pd barrier increased the cell power by more than five times from the value obtained without the bias modification. But the real advantage of the biased barrier was that it actually reduced the resistance of the polymer electrolyte (Nafion) when it was placed in the electrolyte with the cell current density maintained lower than 40 mA cm−240 mA cm−2 (equivalent to maintain the cell voltage higher than 0.4 V in our experimental conditions). Eventual falloff of the power delivered by the cell with the barrier in higher current region should be attributed to mismatch of the charge transfer rate at the Pd/Nafion interfaces with the increased overall current density. © 2003 The Electrochemical Society. All rights reserved.Keywords
This publication has 15 references indexed in Scilit:
- Recent advances in direct methanol fuel cells at Los Alamos National LaboratoryJournal of Power Sources, 2000
- Methanol Transport Through Nation Membranes. Electro-osmotic Drag Effects on Potential Step MeasurementsJournal of the Electrochemical Society, 2000
- A review of the state-of-the-art of the methanol crossover in direct methanol fuel cellsJournal of Power Sources, 1999
- Methanol Tolerant Oxygen Reduction Catalysts Based on Transition Metal SulfidesJournal of the Electrochemical Society, 1998
- Iron(III) tetramethoxyphenylporphyrin(FeTMPP) as methanol tolerant electrocatalyst for oxygen reduction in direct methanol fuel cellsJournal of Applied Electrochemistry, 1998
- Comparative study of methanol crossover across electropolymerized and commercial proton exchange membrane electrolytes for the acid direct methanol fuel cellElectrochimica Acta, 1998
- The degree and effect of methanol crossover in the direct methanol fuel cellJournal of Power Sources, 1998
- Effect of Methanol Crossover in a Liquid‐Feed Polymer‐Electrolyte Direct Methanol Fuel CellJournal of the Electrochemical Society, 1996
- A Methanol Impermeable Proton Conducting Composite Electrolyte SystemJournal of the Electrochemical Society, 1995
- Acid‐Doped Polybenzimidazoles: A New Polymer ElectrolyteJournal of the Electrochemical Society, 1995