Fabrication and Characterization of High‐ k Dielectric Nickel Titanate Thin Films Using a Modified Sol–Gel Method

Authors:

Abstract
This research produced high‐quality, single‐phase nickel titanate (NiTiO 3 ) thin films, a high‐ k material for gate dielectrics, by a modified sol–gel method. The precursor was prepared by reactions of nickel acetate tetrahydrate and titanium isopropoxide in 2‐methoxyethanol with a 1:1 ratio of Ni/Ti in the solution. After coating, the films were post‐heat treated between 500° and 900°C. X‐ray diffraction indicated that the films deposited at and above 600°C were single‐phase nickel titanate. X‐ray photoelectron spectra of a typical thin film revealed that the binding energies of Ni 2 p 3/2 and Ti 2 p 3/2 electrons were 855.2 and 457.7 eV, respectively. Raman spectra showed eight absorptions between 200 and 800 cm −1 . Scanning electron microscope images showed smooth surfaces. Findings showed the dielectric constant of the NiTiO 3 film to be 41.36 by capacitance–voltage analysis. The results show that single‐phase NiTiO 3 film can be prepared by the sol–gel spin coating method and then heat‐treated at 600°C.

This publication has 31 references indexed in Scilit: