A mechanical brake hardware-in-the-loop simulation of a railway vehicle that accounts for hysteresis and pneumatic cylinder dynamics
Open Access
- 1 November 2015
- journal article
- Published by SAGE Publications in Advances in Mechanical Engineering
- Vol. 7 (11)
Abstract
A brake hardware-in-the-loop simulation system for a railway vehicle provides an effective platform for testing the braking performance under various dangerous braking conditions. However, in general, four-brake calipers are required to implement a mechanical brake system for one car. In this article, we implement a brake hardware-in-the-loop simulation system only with one brake caliper and three air tanks accounting for hysteresis and pneumatic cylinder dynamics, ultimately saving installation space and reducing financial budget costs. Since the brake caliper has a high nonlinearity, such as hysteresis resulting from friction and from the precompressed spring of the brake cylinder, we measured the hysteresis of the brake caliper clamping force for a mechanical brake system using loadcells, based on which a mathematical model was constructed for the hysteresis of the clamping force between the brake pad and the disk. Moreover, the pneumatic cylinder dynamics are identified and are implemented in three air tanks, together with hysteresis nonlinearity. The proposed brake hardware-in-the-loop simulation system is applied to the wheel-slide protection simulation of a railway vehicle with an initial speed of 80 km/h and demonstrated experimentally accounting for the hysteresis and brake cylinder dynamics.Keywords
This publication has 13 references indexed in Scilit:
- Improvement of Ride Quality of Railway Vehicle by Semiactive Secondary Suspension System on Roller Rig Using Magnetorheological DamperAdvances in Mechanical Engineering, 2014
- Development of an innovative wheel–rail contact model for the analysis of degraded adhesion in railway systemsTribology International, 2014
- Development of a real-time bogie test rig model based on railway specialised multibody softwareVehicle System Dynamics, 2013
- Technology and Engineering Applications of Simulink2012
- Verification of pneumatic railway brake modelsVehicle System Dynamics, 2010
- Pneumatic train brake simulation methodVehicle System Dynamics, 2009
- Building a Railway Vehicle Model for Hardware-in-the-loop SimulationQuarterly Report of RTRI, 2009
- A railway vehicle multibody model for real-time applicationsVehicle System Dynamics, 2008
- HIL simulation of WSP systems on MI-6 test rigVehicle System Dynamics, 2006
- Creep forces in simulations of traction vehicles running on adhesion limitWear, 2005