Performance Comparison of LMNO Cathodes Produced with Pullulan or PEDOT:PSS Water-Processable Binders
Open Access
Abstract
The aim of this paper is to demonstrate lithium metal battery cells assembled with high potential cathodes produced by sustainable processes. Specifically, LiNi0.5Mn1.5O4 (LMNO) electrodes were fabricated using two different water-processable binders: pullulan (PU) or the bifunctional electronically conductive poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS). The cell performance was evaluated by voltammetric and galvanostatic charge/discharge cycles at different C-rates with 1M LiPF6 in 1:1 (v:v) ethylene carbonate (EC):dimethyl carbonate (DMC) (LP30) electrolyte and compared to that of cells assembled with LMNO featuring poly(vinylidene difluoride) (PVdF). At C/10, the specific capacity of LMNO-PEDOT:PSS and LMNO-PU were, respectively, 130 mAh g−1 and 127 mAh g−1, slightly higher than that of LMNO-PVdF (124 mAh g−1). While the capacity retention at higher C-rates and under repeated cycling of LMNO-PU and LMNO-PVdF electrodes was similar, LMNO-PEDOT:PSS featured superior performance. Indeed, lithium metal cells assembled with PEDOT:PSS featured a capacity retention of 100% over 200 cycles carried out at C/1 and with a high cut-off voltage of 5 V. Overall, this work demonstrates that both the water-processable binders are a valuable alternative to PVdF. In addition, the use of PEDOT:PSS significantly improves the cycle life of the cell, even when high-voltage cathodes are used, therefore demonstrating the feasibility of the production of a green lithium metal battery that can exhibit a specific energy of 400 Wh kg−1, evaluated at the electrode material level. Our work further demonstrates the importance of the use of functional binders in electrode manufacturing.Keywords
Funding Information
- National Agency for New Technologies, Energy and Sustainable Economic Development (Piano Triennale di Realizzazione 2019-2021, Accordo di Programma Ministero dello Sviluppo Economico)
- Regione Emilia Romagna (Progetto Alte Competenze per la Ricerca e il Trasferimento Tecnologico POR FSE 2014/2020)
This publication has 27 references indexed in Scilit:
- Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMPDrying Technology, 2017
- Effect of plasticizers on the physico-mechanical properties of pullulan based pharmaceutical oral filmsEuropean Journal of Pharmaceutical Sciences, 2017
- New Formulations of High-Voltage Cathodes for Li-Ion Batteries with Water-Processable BindersECS Transactions, 2016
- Surface Modification of Li-Rich Cathode Materials for Lithium-Ion Batteries with a PEDOT:PSS Conducting PolymerACS Applied Materials & Interfaces, 2016
- A Commercial Conducting Polymer as Both Binder and Conductive Additive for Silicon Nanoparticle-Based Lithium-Ion Battery Negative ElectrodesACS Nano, 2016
- Improved Stability of Lithium-Ion Battery Cathodes Using Conducting Polymer BindersScience of Advanced Materials, 2016
- Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devicesJournal of Materials Science: Materials in Electronics, 2015
- Cathode materials for next generation lithium ion batteriesNano Energy, 2013
- Electronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable SubstratesChemistry of Materials, 2012
- Preparation and properties of pullulan–alginate–carboxymethylcellulose blend filmsFood Research International, 2008