Effect of Synthesized Titanium Dioxide Nanofibers Weight Fraction on the Tribological Characteristics of Magnesium Nanocomposites Used in Biomedical Applications
Open Access
- 10 January 2023
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 13 (2) , 294
Abstract
Biomedical applications, such as artificial implants, are very significant for the disabled due to their usage in orthopedics. Nevertheless, available materials in such applications have insufficient mechanical and tribological properties. The current study investigated the mechanical and tribological properties of a biomedical metallic material, magnesium (Mg), after incorporating titanium dioxide nanofibers (TiO2) with different loading fractions. The TiO2 nanofibers were synthesized using the electrospinning technique. The ball-milling technique was utilized to ensure the homogenous distribution of TiO2 nanofibers inside the Mg matrix. Then, samples of the mixed powder with different loading fractions of TiO2 nanofibers, 0, 1, 3, 5, and 10 wt.%, were fabricated using a high-frequency induction heat sintering technique. The physicomechanical and tribological properties of the produced Mg/TiO2 nanocomposites were evaluated experimentally. Results showed an enhancement in mechanical properties and wear resistance accompanied by an increase in the weight fraction of TiO2 nanofibers up to 5%. A finite element model was built to assess the load-carrying capacity of the Mg/TiO2 composite to estimate different contact stresses during the frictional process. The finite element results showed an agreement with the experimental results.Keywords
Funding Information
- Researchers Supporting Project (RSPD2023R597)
This publication has 48 references indexed in Scilit:
- Twenty-first century challenges for biomaterialsJournal of The Royal Society Interface, 2010
- Insertion of a TiO$_{2}$ Buffer Layer for the Fixation ofElectrospun TiO$_{2}$ Nanofibers on Glass SubstratesJournal of the Korean Physical Society, 2009
- Titania nanofibers prepared by electrospinningMaterials Letters, 2008
- Generation of multilayered structures for biomedical applications using a novel tri-needle coaxial device and electrohydrodynamic flowJournal of The Royal Society Interface, 2008
- Sol-gel derived bioactive hydroxyapatite/titania composite films on Ti6Al4VJournal of University of Science and Technology Beijing, Mineral, Metallurgy, Material, 2006
- Impact formation and microstructure characterization of thermal sprayed hydroxyapatite/titania composite coatingsBiomaterials, 2003
- Finishing of non-ferrous internal surfaces using ballizing techniqueJournal of Materials Processing Technology, 2002
- Precipitation of Magnesium Apatite on Pure Magnesium Surface during Immersing in Hank’s SolutionMATERIALS TRANSACTIONS, 2001
- Wear Is a Function of Use, Not TimeClinical Orthopaedics and Related Research, 2000
- Tissue-biomaterial interactionsJournal of Materials Science, 1987