Underlying Topography Estimation Over Forest Areas Using Single-Baseline InSAR Data
- 16 November 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 57 (5) , 2876-2888
Abstract
In this paper, a method for digital elevation model (DEM) extraction over forest areas from single-baseline interferometric synthetic aperture radar (InSAR) data is proposed. The main idea of this method is that some backscattering variations which are linked to the geometrical structures of forest occur during the radar acquisition. The time-frequency analysis is used to retrieve these variations by dividing the synthesized SAR image into multiple SAR images in the Fourier domain called sublook images. Then, by interferometry, the sublook images characterized by the same Doppler bandwidth and acquired from spatially separated locations at either end of a baseline are used to estimate the sublook coherences and the above backscattering variations are converted into the variations of sublook coherences. As a result, the number of InSAR observations can be increased. The sublook coherences are then interpreted by the two-layer vegetation scattering model and are assumed to follow a near-linear relationship in the complex plane. The ground phase can then be estimated by linear regression of the sublook coherences. The performance of the proposed method was validated by E-SAR L- and P-band SAR data acquired over coniferous and tropical forests. For the coniferous scenario, the underlying DEM estimated by the proposed method has a root-mean-square error (RMSE) of 4.39 m, which is slightly less accurate than the DEM (with an RMSE of 4.07 m) derived by the polarimetric line-fit (LF) method, but represents a significant improvement in DEM accuracy over the HH InSAR method. For the tropical scenario, the DEMs derived by the proposed method and the polarimetric LF method are closer to the ground surface than those derived by the HH InSAR method, and their mean ground height difference is 0.62 m. The two experiments confirm that it is feasible to extract a DEM by the proposed method, which has a comparable performance in DEM inversion to the polarimetric LF method and only requires single-polarization InSAR data.Keywords
Funding Information
- National Natural Science Foundation of China (41531068, 41671356, 41604012)
- China Postdoctoral Science Foundation (2017M612604)
This publication has 47 references indexed in Scilit:
- Refined Estimation of Time-Varying Baseline Errors in Airborne SAR InterferometryIEEE Geoscience and Remote Sensing Letters, 2006
- Scene characterization using subaperture polarimetric sar dataIEEE Transactions on Geoscience and Remote Sensing, 2003
- Three-stage inversion process for polarimetric SAR interferometryIEE Proceedings - Radar, Sonar and Navigation, 2003
- The shuttle radar topography mission—a new class of digital elevation models acquired by spaceborne radarISPRS Journal of Photogrammetry and Remote Sensing, 2003
- Single-baseline polarimetric SAR interferometryIEEE Transactions on Geoscience and Remote Sensing, 2001
- First demonstration of airborne SAR tomography using multibaseline L-band dataIEEE Transactions on Geoscience and Remote Sensing, 2000
- Vertical structure of vegetated land surfaces from interferometric and polarimetric radarRadio Science, 2000
- Multibaseline InSAR DEM reconstruction: the wavelet approachIEEE Transactions on Geoscience and Remote Sensing, 1999
- Polarimetric SAR interferometryIEEE Transactions on Geoscience and Remote Sensing, 1998
- Vegetation characteristics and underlying topography from interferometric radarRadio Science, 1996