FEATURES OF THE STRUCTURE AND HEAT RESISTANCE OF HIGH-EN- TROPY ALLOYS OF THE FeCrCuNiAl AND FeCrCuNiMn SYSTEMS
Open Access
- 10 September 2024
- journal article
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Casting Processes
- Vol. 157 (3) , 46-52
Abstract
High entropy alloys (HEAs) are an unique class of metallic materials that nominally contain five or more elements in nearly equiatomic proportions. Alloys with high entropy are of great interest primarily because the high configurational entropy in such alloys blocks the formation of intermetallic and chemical compounds. As a result, a single-phase structure of a solid solution, or a combination of solid solutions is formed. The crystal lattice of high-entropy alloys with an one- or two-phase solid solutions structure undergoes significant deformation and can create new, previously unattainable, combinations of properties. Their research is currently at the stage of initial accumulation of information, but according to the already available data, the prospects for their use as heat-resistant materials are very promising. The paper contains information on the phase composition and structure of the HEA of FeNiCrCuAl and FeNiCrCuMn systems. It is shown that they have a microstructure with dendritic morphology, and consist of solid solutions with bcc and fcc crystal lattices. The influence of the chemical composition, such as aluminum and chromium, on the surface oxidation of HEA at temperatures of 900 °C and 1000 °C in the artificial air atmosphere was investigated by the gravimetric analysis method. It was established that alloying with aluminum and chromium, in general, had a positive effect on the heat resistance of the alloys, and the chromium content of 18 wt. % provided them long-term resistance to oxidation at a temperature of 1000 °C. Високоентропійні сплави (ВЕС) являють собою унікальний клас металевих матеріалів, які номінально містять п’ять або більше елементів у майже еквіатомних пропорціях. Сплави з високою ентропією викликають значний інтерес в першу чергу тому, що висока конфігураційна ентропія в таких системах сплавів блокує утворення інтерметалевих та хімічних сполук. Це призводить до формування однофазної структури твердого розчину або комбінації твердих розчинів. Високоентропійні сплави, структура яких складається з одно- або двофазного твердого розчину, в яких кристалічна ґратка зазнає значної деформації, можуть володіти новими, раніше недосяжними комбінаціями властивостей. Їх дослідження наразі перебуває на стадії початкового накопичення інформації, але завдяки вже наявним даним перспективи їх застосування як жаростійких матеріалів є багатообіцяючими. У роботі подано інформацію про фазовий склад і структуру ВЕС систем FeNiCrCuAl та FeNiCrCuMn. Показано, що їх мікроструктура має дендритну морфлологію фаз, що складається з твердих розчинів з ОЦК- та ГЦК-кристалічними ґратками. Методом гравіметричного аналізу досліджено вплив хімічного складу, а саме алюмінію та хрому, на окислення поверхні ВЕС при температурах 900 °С та 1000 °С в атмосфері штучного повітря. Установлено, що легування алюмінієм та хромом у цілому позитивно впливає на окалиностійкість таких матеріалів, а вміст хрому на рівні 18 мас. % надає їм тривалу стійкість від окислення при температурі 1000 °С.This publication has 4 references indexed in Scilit:
- Development and smelting of casting high-entropy alloys based on the Fe-Co-Ni-Mn-Cr system.Casting Processes, 2022
- Investigation of Zr55Cu30Al10Ni5 bulk amorphous alloy crystallizationJournal of Alloys and Compounds, 2019
- Corrosion of high entropy alloysnpj Materials Degradation, 2017
- Cooling Rate and Size Effect on the Microstructure and Mechanical Properties of AlCoCrFeNi High Entropy AlloyJournal of Engineering Materials and Technology, 2009