Guidelines for predicting lesion size at common endocardial locations during radio-frequency ablation
Authors:
- V.R. VorperianVVV.R. Vorperian
- N. BhavarajuNBN. Bhavaraju
- H. CaoHCH. Cao
- J.-Z. TsaiJTJ.-Z. Tsai
- J.G. WebsterJWJ.G. Webster
- 1 February 2001
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 48 (2) , 194-201
Abstract
The authors used the finite element method to study the effect of radio-frequency (RF) catheter ablation on tissue heating and lesion formation at different intracardiac sites exposed to different regional blood velocities. They examined the effect of application of RF current in temperature- and power-controlled mode above and beneath the mitral valve annulus where the regional blood velocities are high and low respectively. The authors found that for temperature-controlled ablation, more power was delivered to maintain the preset tip temperature at sites of high local blood velocity than at sites of low local blood velocity. This induced more tissue heating and larger lesion volumes than ablations at low velocity regions. In contrast, for power-controlled ablation, tissue heating was less at sites of high compared with low local blood velocity for the same RF power setting. This resulted in smaller lesion volumes at sites of low local velocity. The authors' numerical analyzes showed that during temperature-controlled ablation at 60/spl deg/C, the lesion volumes at sites above and underneath the mitral valve were comparable when the duration of RF current application was 10 s. When the duration of RF application was extended to 60 s and 120 s, lesion volumes were 33.3% and 49.4% larger above the mitral valve than underneath the mitral valve. Also, with temperature-controlled ablation, tip temperature settings of 70/spl deg/C or greater were associated with a risk of tissue overheating during long ablations at high local blood velocity sites. In power-controlled ablation (20 W), the lesion volume formed underneath the mitral valve was 165.7% larger than the lesion volume above the mitral valve after 10 s of ablation. The authors' summarized the guidelines for energy application at low and high flow regions.Keywords
This publication has 10 references indexed in Scilit:
- Thermal—electrical finite element modelling for radio frequency cardiac ablation: Effects of changes in myocardial propertiesMedical & Biological Engineering & Computing, 2000
- Finite element analyses of uniform current density electrodes for radio-frequency cardiac ablationIEEE Transactions on Biomedical Engineering, 2000
- A new catheter design using needle electrode for subendocardial RF ablation of ventricular muscles: finite element analysis and in vitro experimentsIEEE Transactions on Biomedical Engineering, 2000
- Thermophysical Properties of Swine MyocardiumInternational Journal of Thermophysics, 1999
- Temperature-controlled radiofrequency catheter ablation of manifest accessory pathwaysEuropean Heart Journal, 1996
- Effect of accessory pathway location on the efficiency of heating during radiofrequency catheter ablationAmerican Heart Journal, 1995
- Three-dimensional finite element analysis of current density and temperature distributions during radio-frequency ablationIEEE Transactions on Biomedical Engineering, 1995
- Cellular electrophysiological effects of hyperthermia on isolated guinea pig papillary muscle. Implications for catheter ablation.Circulation, 1993
- Temperature monitoring during radiofrequency catheter ablation of accessory pathways.Circulation, 1992
- Tissue Heating During Radiofrequency Catheter Ablation: A Thermodynamic Model and Observations in Isolated Perfused and Superfused Canine Right Ventricular Free WallPacing and Clinical Electrophysiology, 1989