Assessment of Metal Flow Balance in Multi-Output Porthole Hot Extrusion of AA6060 Thin-Walled Profile
Open Access
Abstract
For the porthole hot extrusion of a thin-walled tube based on metal flow, the role of the die’s structure should be focused on to achieve precision formation, especially for multi-output extrusion and/or complex cross-sectional profiles. In order to obtain a better metal flow balance, a multi-output porthole extrusion die was developed, including some novel features such as a circular pattern of the portholes with a dart-shaped inlet bridge, a buckle angle in the inlet side of the upper die, a two-step welding chamber, and a non-uniform bearing length distribution. Through the use of thermo-mechanical modeling combined with the Taguchi method, the underlying effects of key die features were investigated, such as the billet buckle angle, the porthole bevel angle, the depth of the welding chamber, and the type of bridge on the metal flow balance. The experimental validation showed that the developed numerical model for the multi-output porthole extrusion process had high prediction accuracy, and was acceptable for use in an industrial extrusion with a complex section.Keywords
Funding Information
- Fundação para a Ciência e a Tecnologia (SFRH/BPD/114823/2016)
- National Natural Science Foundation of China (51705080)
- Natural Science Foundation of Fujian Province (No. 2018J01761; No. 2018J01764)
- Fuzhou science and technology project (2016-G-67)
This publication has 23 references indexed in Scilit:
- Inhomogeneous deformation law in forming of multi-cavity parts under complex loading pathJournal of Materials Processing Technology, 2018
- Influence of Extrusion Temperature on the Aging Behavior and Mechanical Properties of an AA6060 Aluminum AlloyMetals, 2018
- Joining of 1060/6063 aluminum alloys based on porthole die extrusion processJournal of Materials Processing Technology, 2017
- Numerical investigation of an arc inlet structure extrusion die for large hollow sectionsInternational Journal of Material Forming, 2017
- On the die design in AA6082 porthole extrusionCIRP Annals, 2012
- Numerical simulation and metal flow analysis of hot extrusion process for a complex hollow aluminum profileThe International Journal of Advanced Manufacturing Technology, 2011
- Theoretical and experimental investigations on multi-hole extrusion processMaterials & Design (1980-2015), 2009
- FEM simulation of aluminium extrusion through two-hole multi-step pocket diesJournal of Materials Processing Technology, 2009
- Design of a multi-hole extrusion processMaterials & Design (1980-2015), 2009
- FEM simulations of the extrusion of complex thin-walled aluminium sectionsJournal of Materials Processing Technology, 2002