Dual-Stack Piezoelectric Device with Bidirectional Actuation and Improved Performance
Authors:
- 1 July 2004
- journal article
- research article
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 15 (7) , 565-574
Abstract
Piezoelectric stacks can normally take significant compressive loads but cannot tolerate tension. Therefore, conventional piezoelectric stack actuators are mainly designed for the push-only actions and usually incorporate a compressive preload mechanism to protect the stack from experiencing tensile stresses. A common preload method is to include a mechanical spring in parallel with the stack, which may reduce the free stroke capability of the actuator and affect performance. In this research, a new bi-directional (can operate in both push and pull directions) actuator design is introduced, utilizing a pair of matching piezoelectric stack elements within the actuator housing. The stack elements are integrated in a mechanically opposing configuration and are electrically operated out of phase. To examine the performance advantages of the new concept, both analytical and experimental studies are conducted. The dual-stack actuator is compared with two internally preloaded single stacks integrated in a parallel configuration, thus both actuator systems are utilizing equivalent volumes of the piezoelectric material. The analysis indicates that the dual-stack actuator produces greater free stroke, output energy, and energy efficiency than the two parallel single-stack actuators. For experimental evaluations, a dual-stack actuator and an internally preloaded single-stack actuator are fabricated using the same materials, similar construction techniques, and the same piezoelectric stack elements. A testing procedure is formulated to determine the free stroke and blocked force of both the actuators. The experimental results verified the trends observed in the analytical predictions. That is, in addition to being bi-directional, the dual-stack arrangement can produce higher free stroke, blocked force, output energy, specific output energy, and energy efficiency, as compared to two preloaded, parallel-configured single-stack actuators. It is also concluded that by tailoring the dual-stack actuator, it will be 62% volume and weight of a conventional single-stack actuator that produces the same amount of blocked force and free strain.Keywords
This publication has 6 references indexed in Scilit:
- Development of a piezoelectric actuator for trailing edge flap control of full scale rotor bladesSmart Materials and Structures, 2001
- Design of piezostack-driven trailing-edge flap actuator for helicopter rotorsSmart Materials and Structures, 2001
- Review of Smart-Materials Actuation Solutions for Aeroelastic and Vibration ControlJournal of Intelligent Material Systems and Structures, 2000
- Design of a high efficiency, large stroke, electromechanical actuatorSmart Materials and Structures, 1999
- Design of Displacement-Amplified Induced-Strain Actuators for Maximum Energy OutputJournal of Mechanical Design, 1997
- Power and Energy Characteristics of Solid-State Induced-Strain Actuators for Static and Dynamic ApplicationsJournal of Intelligent Material Systems and Structures, 1997