Analysis of As-Built Microstructures and Recrystallization Phenomena on Inconel 625 Alloy Obtained via Laser Powder Bed Fusion (L-PBF)
Open Access
Abstract
The microstructures induced by the laser-powder bed fusion (L-PBF) process have been widely investigated over the last decade, especially on austenitic stainless steels (AISI 316L) and nickel-based superalloys (Inconel 718, Inconel 625). However, the conditions required to initiate recrystallization of L-PBF samples at high temperatures require further investigation, especially regarding the physical origins of substructures (dislocation densities) induced by the L-PBF process. Indeed, the recrystallization widely depends on the specimen substructure, and in the case of the L-PBF process, the substructure is obtained during rapid solidification. In this paper, a comparison is presented between Inconel 625 specimens obtained with different laser-powder bed fusion (L-PBF) conditions. The effects of the energy density (VED) values on as-built and heat-under microstructures are also investigated. It is first shown that L-PBF specimens created with high-energy conditions recrystallize earlier due to a larger density of geometrically necessary dislocations. Moreover, it is shown that lower energy densities offers better tensile properties for as-built specimens. However, an appropriate heat treatment makes it possible to homogenize the tensile properties.Keywords
This publication has 54 references indexed in Scilit:
- Correlation between selective laser melting parameters, pore defects and tensile properties of 99.9 % silverMaterials Today Communications, 2020
- Microstructure and mechanical properties of pure copper manufactured by selective laser meltingMaterials Science and Engineering: A, 2020
- Selective laser melting additive manufacturing of pure tungsten: Role of volumetric energy density on densification, microstructure and mechanical propertiesInternational Journal of Refractory Metals and Hard Materials, 2019
- Crystallographic-orientation-dependent tensile behaviours of stainless steel 316L fabricated by laser powder bed fusionMaterials Science and Engineering: A, 2019
- Effect of heat treatment on the microstructure and mechanical properties of maraging steel by selective laser meltingMaterials Science and Engineering: A, 2019
- Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloyOptics & Laser Technology, 2019
- A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trendsJournal of Materials Science & Technology, 2019
- Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of Inconel 625 fabricated by Selective Laser MeltingAdditive Manufacturing, 2018
- Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical propertiesMaterials Science and Engineering: A, 2018
- Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steelJournal of Materials Processing Technology, 2017