Effect of Na-EDTA on electrical characteristics NaCl electrolyte battery charging solar panels
Open Access
- 1 October 2024
- journal article
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 14 (5) , 4846-4855
Abstract
This research investigates the problem of Cu-Zn electrode batteries with NaCl electrolyte. Previous studies have indicated problems with the electrolyte and electrodes after charging, such as turbidity and deposits in the electrolyte, as well as corrosion on the electrodes. Consequently, the battery can only be used once due to a decline in its electrical characteristics after the initial charging. Through this research, improvements were made to the electrical characteristics of the battery by adding Na-EDTA to enhance usage efficiency. The research method involved mixing NaCl solution with the highest electrical conductivity, using six pairs of Cu-Zn electrodes arranged in series. The physical conditions of the electrolyte and electrodes were observed, and electrical characteristics were measured. The research results indicate that the use of NaCl+Na-EDTA electrolyte produces a battery voltage of 4.20 volts with a current of 2 Ah and can be used twice. Charging with solar panels can be done in 1 hour, but the frequency is limited to two times.Keywords
This publication has 41 references indexed in Scilit:
- Advancements in cooling techniques for enhanced efficiency of solar photovoltaic panels: A detailed comprehensive review and innovative classificationEnergy and Built Environment, 2025
- Product stewardship scheme for solar photovoltaic panelsCurrent Opinion in Green and Sustainable Chemistry, 2023
- PV/T solar panel for supplying residential demands of heating/cooling and hot water with a lower environmental thermal loadEnergy and Buildings, 2023
- Reliability of autonomous solar-wind microgrids with battery energy storage system applied in the residential sectorEnergy Reports, 2023
- Performance, electrochemical process analysis and degradation of gadolinium doped ceria as fuel electrode material for solid oxide electrolysis cellsElectrochimica Acta, 2023
- Retractable roof module with photovoltaic panel as small solar power plantEnergy and Buildings, 2023
- Proof-of-concept of a novel battery recycling approach: Whole process electrolysis (WPE) methodElectrochemistry Communications, 2022
- Electrodialysis for metal removal and recovery: A reviewChemical Engineering Journal, 2022
- The removal of Cu, Ni, and Zn in industrial soil by washing with EDTA-organic acidsArabian Journal of Chemistry, 2020
- Numerical study on polydispersed dust pollution process on solar photovoltaic panels mounted on a building roofEnergy Procedia, 2019