Precision fabrication of high-aspect-ratio micro-holes in 40 mm-thick TC4 alloy by coaxial electrolyte-enveloped laser-electrochemical hybrid machining
Authors:
- Yongbo XuYXYongbo Xu
- Ye DingYDYe Ding
- Wanda XieWXWanda Xie
- Ke ChenKCKe Chen
- Zixiang YuZYZixiang Yu
- Hao LiuHLHao Liu
- Shuiwang WangSWShuiwang Wang
- Yanan LiuYLYanan Liu
- LiJun YangLYLiJun Yang
Preprint
- 17 February 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Fabricating high-aspect-ratio micro-holes in thick-walled titanium alloys presents a persistent challenge due to the conflicting requirements of high machining efficiency and superior surface integrity. In this study, a coaxial electrolyte-enveloped laser-electrochemical hybrid tool is proposed to achieve high-efficiency and precision micro-holes fabrication in 40 mm-thick TC4 alloy. This novel configuration delivers laser energy through a multimode fiber waveguide (MFW) while independently supplying electrolyte through an annular channel, ensuring the synchronous coupling of laser irradiation, electrochemical reaction and electrolyte transport. A time-resolved multiphysics model was established to explicitly bridge the temporal gap between nanosecond laser pulses and microsecond electrochemical pulses. Simulations reveal that independent and coaxial delivery significantly improves laser coupling efficiency to 94.2% while enhancing flow uniformity. Experimental results demonstrate that the hybrid process increases the volumetric removal rate by approximately 28.6% compared to electrochemical machining (ECM). Ultimately, a micro-hole with a depth-to-diameter ratio of ~30.9 and an average surface roughness of Ra ~2.34 μm was successfully fabricated. These findings validate the feasibility of the proposed hybrid tool for producing high-integrity, recast-layer-free deep micro-holes in difficult-to-cut aerospace materials.Keywords
This publication has 23 references indexed in Scilit:
- In situ passivation monitoring of Ti-6Al-4V in 3.5 wt% NaCl solution using ECAFMCorrosion Science, 2025
- Insights into the high-speed electrochemical discharge drilling for film cooling hole: Machining phenomena, morphological evolution, and visualize simulationInternational Journal of Machine Tools and Manufacture, 2024
- Research on simulation method of multiple time scales dissolution process in tube electrode pulse electrochemical machiningJournal of Manufacturing Processes, 2024
- Electrochemical jet manufacturing technology: From fundamentals to applicationInternational Journal of Machine Tools and Manufacture, 2022
- Wire electrochemical micromachining: An overviewInternational Journal of Machine Tools and Manufacture, 2020
- A tool-based hybrid laser-electrochemical micromachining process: Experimental investigations and synergistic effectsInternational Journal of Machine Tools and Manufacture, 2020
- Investigation on the laser-assisted jet electrochemical machining process for improvement in machining performanceThe International Journal of Advanced Manufacturing Technology, 2018
- Heat transfer and material ablation in hybrid laser-waterjet microgrooving of single crystalline germaniumInternational Journal of Machine Tools and Manufacture, 2017
- A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part II: Numerical simulationElectrochimica Acta, 2012
- Thermal effects in laser assisted jet electrochemical machiningCIRP Annals, 2011