An experimental and modelling study of the combustion and emission characteristics for gasoline–diesel dual-fuel engines
Authors:
- 1 June 2011
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 225 (6) , 801-812
Abstract
In this study, the combustion and emissions characteristics of gasoline–diesel dual-fuel operation were investigated both experimentally and numerically. Gasoline fuel was injected through an intake port, and diesel fuel was injected directly into the combustion chamber to trigger combustion. The tested concentrations of diesel fuel were 30 per cent and 40 per cent, and it was found that a smaller amount of diesel fuel forms a more homogeneous mixture. Numerical calculations were performed for selected injection timings (i.e. −20° crank angle (CA) after top dead centre) for increased understanding of the combustion regime of dual-fuel combustion using the KIVA code coupled with the primary reference fuels mechanism. The injection timings of the diesel fuel were swept from −40° to +3° CA. The results showed that gasoline–diesel dual-fuel operation exhibited significant reductions in soot and nitrogen oxide emissions by suppressing the formation of locally rich mixtures or high-temperature regions. However, the carbon monoxide and hydrocarbon emissions were increased for a wide range of injection timings.Keywords
This publication has 19 references indexed in Scilit:
- Emission characteristics of high speed, dual fuel, compression ignition engine operating in a wide range of natural gas/diesel fuel proportionsFuel, 2010
- Combustion analysis on a DI diesel engine with hydrogen in dual fuel modeFuel, 2008
- A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuelsCombustion and Flame, 2008
- Effect of variation in LPG composition on emissions and performance in a dual fuel diesel engineFuel, 2008
- NUMERICAL STUDY ON THE LOW EMISSION WINDOW OF HOMOGENEOUS CHARGE COMPRESSION IGNITION DIESEL COMBUSTIONCombustion Science and Technology, 2007
- Comparisons of Diesel PCCI Combustion Simulations Using a Representative Interactive Flamelet Model and Direct Integration of CFD With Detailed ChemistryJournal of Engineering for Gas Turbines and Power, 2006
- Examination of combustion characteristics and phasing strategies of a natural gas HCCI engineEnergy Conversion and Management, 2005
- Effect of Premixed Gasoline Fuel on the Combustion Characteristics of Compression Ignition EngineEnergy & Fuels, 2004
- MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODELAtomization and Sprays, 1999
- Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε ModelsCombustion Science and Technology, 1995